Настройка Tevii S600 Usb в Ubuntu 9.04

[4erteg]

Кажется всё сделал дрова, фирмвары, но

andrey@andrey-laptop:~$ szap -c /etc/channels.conf -n 1 -x

reading channels from file '/etc/channels.conf'

zapping to 1 'gc':

sat 0, frequency = 10719 MHz V, symbolrate 27500000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

ioctl FE_GET_INFO failed: Inappropriate ioctl for device

andrey@andrey-laptop:~$ szap -c /etc/channels.conf -n 1 -x

reading channels from file '/etc/channels.conf'

zapping to 1 'gc':

sat 0, frequency = 10719 MHz V, symbolrate 27500000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

ioctl FE_GET_INFO failed: Inappropriate ioctl for device

andrey@andrey-laptop:~$ sudo femon

opening frontend failed: No such file or directory

если самому создать то

andrey@andrey-laptop:~$ sudo hdparm -d /dev/hda

/dev/hda: No such file or directory

andrey@andrey-laptop:~$ sudo hdparm -d /dev/hda

/dev/hda: No such file or directory

andrey@andrey-laptop:~$ szap -c /etc/channels.conf -n 1 -x

reading channels from file '/etc/channels.conf'

zapping to 1 'gc':

sat 0, frequency = 10719 MHz V, symbolrate 27500000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

ioctl FE_GET_INFO failed: Inappropriate ioctl for device

может кто чем помочь?

[4erteg]

хм до этого стаивл через .deb пакет а вот терь решил скомпилить а он выдает

andrey@andrey-laptop:~/2$ make

make -C /home/andrey/2/v4l

make[1]: Вход в каталог `/home/andrey/2/v4l'

perl scripts/make_config_compat.pl /lib/modules/2.6.24-16-generic/build ./.myconfig ./config-compat.h

File not found: /lib/modules/2.6.24-16-generic/build/include/linux/netdevice.h at scripts/make_config_compat.pl line 15.

make[1]: *** [config-compat.h] Ошибка 2

make[1]: Выход из каталога `/home/andrey/2/v4l'

make: *** [all] Ошибка 2

[4erteg]

dmesg выдает

[ 217.373285] usb 1-1: USB disconnect, address 6

[ 217.398886] dvb-usb: DVBWorld DVB-S 2102 USB2.0 successfully deinitialized and disconnected.

[ 218.708061] usb 1-1: new high speed USB device using ehci_hcd and address 7

[ 218.840543] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2

[ 218.841083] usb 1-1: configuration #1 chosen from 1 choice

[ 218.841387] dvb-usb: found a 'DVBWorld DVB-S 2102 USB2.0' in cold state, will try to load a firmware

[ 218.841396] usb 1-1: firmware: requesting dvb-usb-dw2102.fw

[ 218.888440] dvb-usb: downloading firmware from file 'dvb-usb-dw2102.fw'

[ 218.888448] dw2102: start downloading DW210X firmware

[ 219.045077] dvb-usb: found a 'DVBWorld DVB-S 2102 USB2.0' in warm state.

[ 219.046866] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

[ 219.047225] DVB: registering new adapter (DVBWorld DVB-S 2102 USB2.0)

[ 219.245374] dvb-usb: MAC address: 00:18:bd:5a:fd:f9

[ 219.454319] dw2102: Attached si21xx!

[ 219.454325]

[ 219.454335] DVB: registering adapter 0 frontend 1 (SL SI21XX DVB-S)...

[ 219.459839] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input14

[ 219.493495] dvb-usb: schedule remote query interval to 150 msecs.

[ 219.493506] dvb-usb: DVBWorld DVB-S 2102 USB2.0 successfully initialized and connected.

[stanislv]

вообще в убунту по умолчанию стоят норм дрова на эту карту.. надо только скачать и загрузить firmware

[Ферум]

Посмотреть надо http://www.forum.free-x.de/wbb/index.php?p...rdID=14ea68cdbc