yuzigor

ресивер ipbox 9000HD, сегодня добавил каналы триколора на 11804 DVB-S2, при их просмотре ресивер виснет, пробовал несколько раз, черный экран при включении любого канала, один раз даже пришлось выключить с выключателя сзади ресивера. Там каналы в MPEG 4, может в этом проблема, так как до этого при просмотре основных каналов триколора и НТВплюс HD такого не было.. Подскажите что можно сделать.. И ещё один вопрос, пользуюсь шарой через мегафон-модем 3G, так вот часто бывает что картинка останавливается, интернет вроде бы более менее стабильный?

подскажите, где находятся файлы priority.list и ignore.list

вот usbmodem.log [1.usbmodem] [13:30:57] started [1.usbmodem] [13:30:57] USB_MODEM is set to 12d1:1003 [1.usbmodem] [13:31:03] scanning usb connected devices 12d1:1003 [1.usbmodem] [13:31:08] device directly matching 12d1:1003 is connected [1.usbmodem] [13:31:08] loading usbserial.ko for vendor=0x12d1 product=0x1003 [1.usbmodem] [13:31:09] pppd peer is set to: hua [1.usbmodem] [13:31:10] detecting serial device in /dev, attempt #1/10 [1.usbmodem] [13:31:10] starting PPP daemon using peer: hua [1.usbmodem] [13:31:10] finished "[1.usbmodem] [13:31:10] starting PPP daemon using peer: hua" на разные peer файлы не обращайте внимание, я логи с разными делал

с переключением проблему решил, но подключиться никак не получается [PGI ~]$ pppd call gprs Script /sbin/chat -v -f /var/etc/ppp/chats/gprs.chat finished (pid 1202), status = 0x1 Connect script failed может у кого есть рабочие gprs.chat и gprs для мегафона, помогите пожалуйста

и вот ещё лог usb_modeswitch.9.log usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Found 002 usb_os_find_busses: Found 001 usb_os_find_busses: Skipping non bus directory devices usb_os_find_devices: Found 003 on 002 usb_os_find_devices: Found 001 on 002 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 001 on 001 Reading config file: /var/etc/usb_modeswitch.d/12d1:1003 * usb-modeswitch: handle USB devices with multiple modes * Version 1.1.1 © Josua Dietze 2010 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1003 TargetVendor= not set TargetProduct= not set TargetClass= 0xff DetachStorageOnly=0 HuaweiMode=1 SierraMode=0 SonyMode=0 GCTMode=0 MessageEndpoint= not set MessageContent= not set NeedResponse=0 ResponseEndpoint= not set Interface=0x00 InquireDevice disabled Success check enabled, max. wait time 20 seconds System integration mode enabled Looking for target devices ... searching devices, found USB ID 12d1:1003 found matching vendor ID found matching product ID target class ff matching adding device searching devices, found USB ID 0000:0000 searching devices, found USB ID 0000:0000 Found devices in target mode or class (1) Looking for default devices ... searching devices, found USB ID 12d1:1003 found matching vendor ID found matching product ID target class ff matching not adding device as default searching devices, found USB ID 0000:0000 searching devices, found USB ID 0000:0000 No devices in default mode or class found. Nothing to do. Bye.

помогите переключить Huawei E220 в режим модема, делаю как описано в network.ru, но не хочет переключать вот lsusb: [PGI ~]$ lsusbBus 002 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA ModemBus 002 Device 001: ID 0000:0000Bus 001 Device 001: ID 0000:0000вот dmesg: ST40-ehci ST40-ehci.2: new USB bus registered, assigned bus number 1ST40-ehci ST40-ehci.2: irq 169, io mem 0xb91ffe00ST40-ehci ST40-ehci.2: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detected2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (ST40)ST40_start_host_controlST40-ohci ST40-ohci.1: STB7100 OHCIST40-ohci ST40-ohci.1: new USB bus registered, assigned bus number 2ST40-ohci ST40-ohci.1: irq 168, io mem 0xb91ffc00usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detectedInitializing USB Mass Storage driver...usbcore: registered new driver usb-storageUSB Mass Storage support registered.usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driverusbcore: registered new driver asixusbcore: registered new driver net1080usbcore: registered new driver plusbi2c /dev entries driveri2c_st40_pio: ST40 PIO based I2C Driveri2c_st40_pio: allocated pin (2,0) for scl (0x847a7c0c)i2c_st40_pio: allocated pin (2,1) for sda (0x847a7c1c)i2c_st40_pio: allocated pin (3,0) for scl (0x847a7c8c)i2c_st40_pio: allocated pin (3,2) for sda (0x847a7cac)i2c_st40_pio: allocated pin (4,0) for scl (0x847a7d0c)i2c_st40_pio: allocated pin (4,1) for sda (0x847a7d1c)i2c_st40_pio bus 0: SCL=PIO2[0], SDA=PIO2[1]i2c_st40_pio bus 1: SCL=PIO3[0], SDA=PIO3[2]i2c_st40_pio bus 2: SCL=PIO4[0], SDA=PIO4[1]STMicroelectronics - Coprocessors st231 Initst-coprocessor-0: No RAM reservedst231-0 Coprocessor ------------------------------------------- not configured!---------------------------------------------------------------st-coprocessor-1: No RAM reservedst231-1 Coprocessor ------------------------------------------- not configured!---------------------------------------------------------------ip_conntrack version 2.4 (648 buckets, 5184 max) - 224 bytes per conntrackip_conntrack_pptp version 3.1 loadedip_nat_pptp version 3.0 loadedip_tables: © 2000-2006 Netfilter Core Teamipt_recent v0.3.1: Stephen Frost <[email protected]>. http://snowman.net/projects/ipt_recent/TCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17ieee80211: 802.11 data/management/control stack, git-1.1.7ieee80211: Copyright © 2004-2005 Intel Corporation <[email protected]>ieee80211_crypt: registered algorithm 'NULL'ieee80211_crypt: registered algorithm 'WEP'stmmac_open: MAC address 00:13:18:02:46:4dVFS: Mounted root (squashfs filesystem) readonly.Freeing unused kernel memory: 96k freedWarning: unable to open an initial console.Empty flash at 0x0000fffc ends at 0x00010000CLEANMARKER node found at 0x00010000, not first node in block (0x00000000)Empty flash at 0x0002fffc ends at 0x00030000CLEANMARKER node found at 0x00030000, not first node in block (0x00020000)Empty flash at 0x0004fff4 ends at 0x00050000CLEANMARKER node found at 0x00050000, not first node in block (0x00040000)Empty flash at 0x0006fffc ends at 0x00070000CLEANMARKER node found at 0x00070000, not first node in block (0x00060000)Empty flash at 0x0008fffc ends at 0x00090000CLEANMARKER node found at 0x00090000, not first node in block (0x00080000)Empty flash at 0x000afffc ends at 0x000b0000CLEANMARKER node found at 0x000b0000, not first node in block (0x000a0000)Empty flash at 0x000cfffc ends at 0x000d0000CLEANMARKER node found at 0x000d0000, not first node in block (0x000c0000)Empty flash at 0x000efffc ends at 0x000f0000CLEANMARKER node found at 0x000f0000, not first node in block (0x000e0000)Empty flash at 0x0010fffc ends at 0x00110000CLEANMARKER node found at 0x00110000, not first node in block (0x00100000)Empty flash at 0x0012fffc ends at 0x00130000CLEANMARKER node found at 0x00130000, not first node in block (0x00120000)Empty flash at 0x0014fffc ends at 0x00150000CLEANMARKER node found at 0x00150000, not first node in block (0x00140000)Empty flash at 0x0016fffc ends at 0x00170000CLEANMARKER node found at 0x00170000, not first node in block (0x00160000)Empty flash at 0x0018fffc ends at 0x00190000CLEANMARKER node found at 0x00190000, not first node in block (0x00180000)Empty flash at 0x001afffc ends at 0x001b0000CLEANMARKER node found at 0x001b0000, not first node in block (0x001a0000)CLEANMARKER node found at 0x001d0000, not first node in block (0x001c0000)CLEANMARKER node found at 0x001f0000, not first node in block (0x001e0000)Empty flash at 0x0020fffc ends at 0x00210000CLEANMARKER node found at 0x00210000, not first node in block (0x00200000)Empty flash at 0x0022fffc ends at 0x00230000CLEANMARKER node found at 0x00230000, not first node in block (0x00220000)CLEANMARKER node found at 0x00250000, not first node in block (0x00240000)Empty flash at 0x0026fffc ends at 0x00270000CLEANMARKER node found at 0x00270000, not first node in block (0x00260000)Empty flash at 0x0028fffc ends at 0x00290000CLEANMARKER node found at 0x00290000, not first node in block (0x00280000)Empty flash at 0x002afffc ends at 0x002b0000CLEANMARKER node found at 0x002b0000, not first node in block (0x002a0000)CLEANMARKER node found at 0x002d0000, not first node in block (0x002c0000)CLEANMARKER node found at 0x002f0000, not first node in block (0x002e0000)Empty flash at 0x0030fffc ends at 0x00310000CLEANMARKER node found at 0x00310000, not first node in block (0x00300000)Empty flash at 0x0032fffc ends at 0x00330000CLEANMARKER node found at 0x00330000, not first node in block (0x00320000)usb 2-1: new full speed USB device using ST40-ohci and address 2usb 2-1: configuration #1 chosen from 1 choicescsi1 : SCSI emulation for USB Mass Storage devicesusb-storage: device found at 2usb-storage: waiting for device to settle before scanningusb 2-1: USB disconnect, address 2input: Relook IR Keyboard as /class/input/input0ciio: module license 'unspecified' taints kernel.ciio device driver.ciio client i2c is attachedusb 2-1: new full speed USB device using ST40-ohci and address 3usb 2-1: configuration #1 chosen from 1 choicescsi2 : SCSI emulation for USB Mass Storage devicesusb-storage: device found at 3usb-storage: waiting for device to settle before scanningstos_core: no version magic, tainting kernel.stos_core_init_module(): Initializing STOS Modulestcommon_core: no version magic, tainting kernel.stcommon_core_init_module(): Initializing STCOMMON ModuleSetting all Group priorities donePTI Clock: Cut 3.1 detected -> applying 27000000Hz oscillator config ...Preproc Clock: Cut 3.1 detected -> setting Preproc clock.mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04200000LXLOADER virtual io kernel address of phys 0xa4200000 = 0xa4200000lxload_open: major=254 minor=0setting up Audio LX in NON-DEBUG modei2c_adapter i2c-2: sendbytes: error - bailout.lxload_release: major=254 minor=0Starting Audio LX by disabling resetLX loaded: Base: 0xa4200000 Last: 0xa42cab04 Size:830212mod_lxload_exit: Exiting LXLOAD kernel Modulemod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04000000LXLOADER virtual io kernel address of phys 0xa4000000 = 0xa4000000stmmac_open: MAC address 00:13:18:02:46:4dlxload_open: major=254 minor=0setting up LX in NON-DEBUG modelxload_release: major=254 minor=0Starting video LX by disabling resetLX loaded: Base: 0xa4000000 Last: 0xa4093d9c Size:605596mod_lxload_exit: Exiting LXLOAD kernel Module Vendor: HUAWEI Model: Mass Storage Rev: 2.31 Type: CD-ROM ANSI SCSI revision: 02usb-storage: device scan completei2c_adapter i2c-0: sendbytes: error - bailout.PHY: 0:01 - Link is Up - 100/Fulli2c_adapter i2c-2: sendbytes: error - bailout.usbserial: no version magic, tainting kernel.usbcore: registered new driver usbserialdrivers/usb/serial/usb-serial.c: USB Serial support registered for genericusbserial_generic 2-1:1.0: generic converter detectedusb 2-1: generic converter now attached to ttyUSB0usbserial_generic 2-1:1.1: generic converter detectedusb 2-1: generic converter now attached to ttyUSB1usbcore: registered new driver usbserial_genericdrivers/usb/serial/usb-serial.c: USB Serial Driver corestapi: no version magic, tainting kernel.stblit_ioctl_init_module: Initializing STBLIT IOCTL ModuleLoad module stclkrv_core by modprobe (pid 877)stvmix_ioctl_init_module: Initializing STVMIX IOCTL ModuleLoad module stavmem_ioctl [248] by modprobe (pid 877)stpio_core_init_module(): Initializing STPIO Modulestvout_ioctl_init_module: Initializing STVOUT IOCTL ModuleLoad module stfdma_ioctl [243] by modprobe (pid 877)Load module fdma [242] by modprobe (pid 877)stvtg_ioctl_init_module: Initializing STVTG IOCTL ModuleLoad module stpti4_core by modprobe (pid 877)Load module staudlx_core [237] by modprobe (pid 877)sthdmi_ioctl_init_module: Initializing STHDMI IOCTL Moduleutils_ioctl_init_module: Initializing UTILS IOCTL ModuleACCESS 00000002Open Read/Writestevt: Setting New buffer Size 102400ACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteUTILS: ioctl command 0 [0x00007e00]ACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteACCESS 00000002Open Read/WriteFixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727ac ins=0x6141Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727bc ins=0x2411Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727ac ins=0x6141Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727bc ins=0x2411Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727ac ins=0x6141Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727bc ins=0x2411Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727ac ins=0x6141Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x004727bc ins=0x2411Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x297add4e ins=0x6101Fixing up unaligned userspace access in "sbox" pid=1047 pc=0x297add5a ins=0x2011REAP:+I-STC=611595825 PTS=611712450, Drift=116625 Th=1890, NumberToDo=64PCMPLAYER(PCMPLAYER0) => Pause (ms)=110PCMPLAYER(PCMPLAYER0) => Pause (ms)=66REAP:+I-STC=626046344 PTS=626098050, Drift=51706 Th=1890, NumberToDo=28

спасибо

"Чтобы получить аппаратный идентификатор устройства, подключите модем к ресиверу и дайте Telnet команду: lsusb" ну вот, эта команда не выдаёт ничего, может нужно только через PCEditor ?

ipbox 9000HD, подскажите, почему в telnet команда lsusb ничего не показывает?