Glinski
-
Постов
5 -
Зарегистрирован
-
Посещение
Сообщения, опубликованные Glinski
-
-
Пробував и с (gprs) ничево не выходит.
Спасибо!
Буду искать в инете.
-
Я всё перепробував модем не запускается.
вот мои настройки:
Chats/3g:
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
REPORT CONNECT
TIMEOUT 120
"" "AT&F"
OK "ATE1"
# Is there a PIN set on the SIM?
#OK "AT+CPIN?"
# What network are we connected to?
OK "AT+COPS?"
# Next line can be used to get a full list of available
# networks, but it takes a long time!
#OK "AT+COPS=?"
# List what AT commands we can issue to this card.
#OK "AT&V"
# Prefer UMTS networks over GPRS networks
# (but connect to GPRS if UMTS unavailable)
OK "AT_OPSYS=3"
# Current network signal strength
OK "AT+CSQ"
# Note the single quotes at the beginning and end,
# reversing the quoting (double at ends, single
# inside) does NOT work!
OK 'AT+CGDCONT=1,"IP","internet"'
TIMEOUT 60
OK "ATD#777"
CONNECT c
Peers/3g:
# If pppd reports this as a non-modem thing, then run the huaweiAktBbo program
/dev/ttyUSB0
#Baudrate -- Note that setting this to 384000 yields an error message
# about this speed not being supported!
460800
#Idle time for closing connection
idle 7200
#Lock the device for this PPPD process use only
lock
#Use normal handshaking
crtscts
#Assume it is a modem device and force modem control methods
modem
#Any user can start the connection
noauth
#Make the ppp link the default root
defaultroute
#Username and Password for computer/GlobeTrotter ppp link
#Normally ignored. Change if GSM Operator requires it
user IT@IT
password IT
#Change the path to chat if required for your version of Linux
connect "/sbin/chat -V -f /var/etc/ppp/3g.chat"
#Accept IP address provided by network
noipdefault
#Detach PPPD from console used to run the program {optional}
#updetach
#Get DNS addresses from operator
usepeerdns
#Don't use VJ compression for ppp link
novj
# Make the connection persistent, and not terminate if/when errors occur.
persist
maxfail 0
debug
kdebug 4
А вот лог:
[net] [20:07:32] started
[net] [20:07:32] creating web interface pipe
[net] [20:07:32] init USB comms
[net] [20:07:33] USB_MODEM is set to 1410:2110
[net] [20:07:33] bringing up interface lo
[net] [20:07:34] bringing up interface eth0
udhcpc (v1.18.4) started
Sending discover...
Sending discover...
Sending select for 192.168.1.4...
Lease of 192.168.1.4 obtained, lease time 86400
adding dns 192.168.1.1
[net] [20:07:42] checking USB modem
[net] [20:07:42] scanning usb connected devices
[net] [20:07:46] device directly matching 1410:2110 is connected
[net] [20:07:46] loading usbserial.ko for vendor=0x1410 product=0x2110
[net] [20:07:47] PPPD_PEER peer is set to: 3g
[net] [20:07:47] detecting serial device in /dev
[net] [20:07:47] starting PPP call to 3g
[net] [20:07:52] setting hostname to [cuberevo]
[net] [20:07:53] starting inetd
[net] [20:07:53] network is ready
[net] [20:07:53] NTP sync is disabled, system time = micom time
[net] [20:07:53] samba daemon is disabled, skipping
[net] [20:07:53] nfs daemon is disabled, skipping
[net] [20:07:53] sending mount request to sbox automounter
[net] [20:07:53] finished
ЧТО НЕ ТАК?
Спасибо!
-
crw-rw---- 1 root root 5, 0 Jan 1 2000 /dev/tty crw-rw---- 1 root root 4, 0 Jan 1 2000 /dev/tty0 crw-rw---- 1 root root 4, 1 Jan 1 2000 /dev/tty1 crw-rw---- 1 root root 4, 10 Jan 1 2000 /dev/tty10 crw-rw---- 1 root root 4, 11 Jan 1 2000 /dev/tty11 crw-rw---- 1 root root 4, 12 Jan 1 2000 /dev/tty12 crw-rw---- 1 root root 4, 13 Jan 1 2000 /dev/tty13 crw-rw---- 1 root root 4, 14 Jan 1 2000 /dev/tty14 crw-rw---- 1 root root 4, 15 Jan 1 2000 /dev/tty15 crw-rw---- 1 root root 4, 16 Jan 1 2000 /dev/tty16 crw-rw---- 1 root root 4, 17 Jan 1 2000 /dev/tty17 crw-rw---- 1 root root 4, 18 Jan 1 2000 /dev/tty18 crw-rw---- 1 root root 4, 19 Jan 1 2000 /dev/tty19 crw-rw---- 1 root root 4, 2 Jan 1 2000 /dev/tty2 crw-rw---- 1 root root 4, 20 Jan 1 2000 /dev/tty20 crw-rw---- 1 root root 4, 21 Jan 1 2000 /dev/tty21 crw-rw---- 1 root root 4, 22 Jan 1 2000 /dev/tty22 crw-rw---- 1 root root 4, 23 Jan 1 2000 /dev/tty23 crw-rw---- 1 root root 4, 24 Jan 1 2000 /dev/tty24 crw-rw---- 1 root root 4, 25 Jan 1 2000 /dev/tty25 crw-rw---- 1 root root 4, 26 Jan 1 2000 /dev/tty26 crw-rw---- 1 root root 4, 27 Jan 1 2000 /dev/tty27 crw-rw---- 1 root root 4, 28 Jan 1 2000 /dev/tty28 crw-rw---- 1 root root 4, 29 Jan 1 2000 /dev/tty29 crw-rw---- 1 root root 4, 3 Jan 1 2000 /dev/tty3 crw-rw---- 1 root root 4, 30 Jan 1 2000 /dev/tty30 crw-rw---- 1 root root 4, 31 Jan 1 2000 /dev/tty31 crw-rw---- 1 root root 4, 32 Jan 1 2000 /dev/tty32 crw-rw---- 1 root root 4, 33 Jan 1 2000 /dev/tty33 crw-rw---- 1 root root 4, 34 Jan 1 2000 /dev/tty34 crw-rw---- 1 root root 4, 35 Jan 1 2000 /dev/tty35 crw-rw---- 1 root root 4, 36 Jan 1 2000 /dev/tty36 crw-rw---- 1 root root 4, 37 Jan 1 2000 /dev/tty37 crw-rw---- 1 root root 4, 38 Jan 1 2000 /dev/tty38 crw-rw---- 1 root root 4, 39 Jan 1 2000 /dev/tty39 crw-rw---- 1 root root 4, 4 Jan 1 2000 /dev/tty4 crw-rw---- 1 root root 4, 40 Jan 1 2000 /dev/tty40 crw-rw---- 1 root root 4, 41 Jan 1 2000 /dev/tty41 crw-rw---- 1 root root 4, 42 Jan 1 2000 /dev/tty42 crw-rw---- 1 root root 4, 43 Jan 1 2000 /dev/tty43 crw-rw---- 1 root root 4, 44 Jan 1 2000 /dev/tty44 crw-rw---- 1 root root 4, 45 Jan 1 2000 /dev/tty45 crw-rw---- 1 root root 4, 46 Jan 1 2000 /dev/tty46 crw-rw---- 1 root root 4, 47 Jan 1 2000 /dev/tty47 crw-rw---- 1 root root 4, 48 Jan 1 2000 /dev/tty48 crw-rw---- 1 root root 4, 49 Jan 1 2000 /dev/tty49 crw-rw---- 1 root root 4, 5 Jan 1 2000 /dev/tty5 crw-rw---- 1 root root 4, 50 Jan 1 2000 /dev/tty50 crw-rw---- 1 root root 4, 51 Jan 1 2000 /dev/tty51 crw-rw---- 1 root root 4, 52 Jan 1 2000 /dev/tty52 crw-rw---- 1 root root 4, 53 Jan 1 2000 /dev/tty53 crw-rw---- 1 root root 4, 54 Jan 1 2000 /dev/tty54 crw-rw---- 1 root root 4, 55 Jan 1 2000 /dev/tty55 crw-rw---- 1 root root 4, 56 Jan 1 2000 /dev/tty56 crw-rw---- 1 root root 4, 57 Jan 1 2000 /dev/tty57 crw-rw---- 1 root root 4, 58 Jan 1 2000 /dev/tty58 crw-rw---- 1 root root 4, 59 Jan 1 2000 /dev/tty59 crw-rw---- 1 root root 4, 6 Jan 1 2000 /dev/tty6 crw-rw---- 1 root root 4, 60 Jan 1 2000 /dev/tty60 crw-rw---- 1 root root 4, 61 Jan 1 2000 /dev/tty61 crw-rw---- 1 root root 4, 62 Jan 1 2000 /dev/tty62 crw-rw---- 1 root root 4, 63 Jan 1 2000 /dev/tty63 crw-rw---- 1 root root 4, 7 Jan 1 2000 /dev/tty7 crw-rw---- 1 root root 4, 8 Jan 1 2000 /dev/tty8 crw-rw---- 1 root root 4, 9 Jan 1 2000 /dev/tty9 crw-rw---- 1 root root 204, 40 Jan 1 2000 /dev/ttyAS0 crw-rw---- 1 root root 204, 41 Jan 1 2000 /dev/ttyAS1 crw-rw---- 1 root root 188, 0 Apr 20 19:57 /dev/ttyUSB0 crw-rw---- 1 root root 188, 1 Apr 20 19:57 /dev/ttyUSB1 crw-rw---- 1 root root 188, 2 Apr 20 19:57 /dev/ttyUSB2 crw-rw---- 1 root root 188, 3 Apr 20 19:57 /dev/ttyUSB3
-
[Есть проблема, никак не выходит прив"язати модем Novatel usb720 Интертелекомовский к 9000-у через USB на имидже PGI v1.0 :
[PGI ~]$ lsusb
Bus 002 Device 002: ID 1410:2110 Novatel Wireless Ovation U720/MCD3000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[PGI ~]$ ls -1 /var/etc/usb_modeswitch.d
1410:5010
1410:5020
1410:5030
1410:5031
Как видим, нужного мне модема нет в перечне usb_modeswitch. Забавлялся по всякому, но ничего не выходит. Что посоветуете?
Спасибо!
Прошивка PGI 1.2
в IPBOX HD / SEZAM HD / CUBEREVO HD
Опубликовано
AB IPBox9000HD пршивка PGI 1.2
Подскажите как можно подключить через Com Port,протоколом TWIN или MICRO, TECHNOBOX T-910 прошитый как модем для сатшары 39е
Может какой плагин нужен ?