Давай все сначала и по порядку, как я писал постом выше.
Спасибо всем осбенно anatoly что направили на путь истины.
зделал всё заново:перепрошил PGI-910-v0.6.1
зашол настройка HDD ,форматировать HDD.
дальше телнетом:
[PGI ~]$ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 125 1004031 83 Linux
/dev/sda2 126 30401 243191970 83 Linux
[PGI ~]$ fdisk /dev/sda
The number of cylinders for this disk is set to 30401.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): t
Partition number (1-4): 1
Hex code (type L to list codes): 82
Changed system type of partition 1 to 82 (Linux swap)
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table
fdisk: WARNING: rereading partition table failed, kernel still uses old table: D
evice or resource busy
[PGI ~]$ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 125 1004031 82 Linux swap
/dev/sda2 126 30401 243191970 83 Linux
[PGI ~]$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 18176 18176 0 100% /
none 33236 24 33212 0% /tmp
none 33236 0 33236 0% /mnt
none 33236 64 33172 0% /dev
tmpfs 33236 0 33236 0% /dev/shm
/dev/mtdblock4 10240 9468 772 92% /var
/dev/sda2 243161312 191784 230809932 0% /media
[PGI ~]$ mkfs -t ext2 -I 128 /dev/sda1
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
62976 inodes, 251007 blocks
12550 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=260046848
8 block groups
32768 blocks per group, 32768 fragments per group
7872 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: 0/8ocks and filesystem accounting information: done
This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[PGI ~]$ fdisk /dev/sdb
fdisk: can't open '/dev/sdb'
[PGI ~]$ fdisk /dev/sda1
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.
Command (m for help): a
Partition number (1-4): 1
Warning: partition 1 has empty type
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table
fdisk: WARNING: rereading partition table failed, kernel still uses old table: I
nvalid argument
[PGI ~]$ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 125 1004031 82 Linux swap
/dev/sda2 126 30401 243191970 83 Linux
[PGI ~]$ fdisk /dev/sda1
Command (m for help): p
Disk /dev/sda1: 1028 MB, 1028127744 bytes
255 heads, 63 sectors/track, 124 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1p1 * 1 1 0 0 Empty
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 0, 0) logical=(0, 0, 1)
Partition 1 has different physical/logical endings:
phys=(0, 0, 0) logical=(267349, 89, 4)
Partition 1 does not end on cylinder boundary
Command (m for help): a
Partition number (1-4): 1
Warning: partition 1 has empty type
Command (m for help): p
Disk /dev/sda1: 1028 MB, 1028127744 bytes
255 heads, 63 sectors/track, 124 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table
fdisk: WARNING: rereading partition table failed, kernel still uses old table: Inv
alid argument
[PGI ~]$ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 125 1004031 82 Linux swap
/dev/sda2 126 30401 243191970 83 Linux
[PGI ~]$ fdisk /dev/sda
The number of cylinders for this disk is set to 30401.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): a
Partition number (1-4): 1
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table
fdisk: WARNING: rereading partition table failed, kernel still uses old table: D
evice or resource busy
[PGI ~]$ fdisk -
fdisk: can't open '-'
[PGI ~]$ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 125 1004031 82 Linux swap
/dev/sda2 126 30401 243191970 83 Linux
[PGI ~]$ mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /tmp type tmpfs (rw)
none on /mnt type tmpfs (rw)
none on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
tmpfs on /dev/shm type tmpfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/mtdblock4 on /var type jffs2 (rw,noatime)
none on /tmp/mqueue type mqueue (rw)
/dev/sda2 on /media type ext3 (rw,data=writeback)
[PGI ~]$ mount -t ext2 /dev/sda1 /media
[PGI ~]$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 18176 18176 0 100% /
none 33236 24 33212 0% /tmp
none 33236 0 33236 0% /mnt
none 33236 64 33172 0% /dev
tmpfs 33236 0 33236 0% /dev/shm
/dev/mtdblock4 10240 9468 772 92% /var
/dev/sda2 996052 1244 944608 0% /media
/dev/sda1 996052 1244 944608 0% /media
[PGI ~]$ cd /media
[PGI /media]$ tar xzf barracuda_092_cuberevo-910_usb.tar.gz
[PGI /media]$
грузется с кнопки 2 мультебут PGI.
работает всё ок. HDD неразбивал. :rolleyes:
