Перейти к содержанию

Skyway Classic / Platinum / Diamond


Рекомендуемые сообщения

1колонка время слева.2я ip adress написано local.3я user info.4я Messange написано вней listening for syslog messages on ip adress 192.168.1.3 вторая срока просто версия проги

Ссылка на комментарий
Поделиться на другие сайты

ну если thor1 смотрю то думаю что работает

ну и причем тут тор? заходим на рес телнетом, даем команду ps ax и смотрим есть ли мжкамд в процессах, показываем и нам сюда!
Ссылка на комментарий
Поделиться на другие сайты

HD_PVR

=======

~ # ps ax

PID USER VSZ STAT COMMAND

1 root 2204 S init

2 root 0 SW< [ksoftirqd/0]

3 root 0 SW< [events/0]

4 root 0 SW< [khelper]

5 root 0 SW< [kthread]

6 root 0 SW< [kblockd/0]

7 root 0 SW< [khubd]

8 root 0 SW< [kseriod]

9 root 0 SW [pdflush]

10 root 0 SW [pdflush]

11 root 0 SW [kswapd0]

12 root 0 SW< [aio/0]

13 root 0 SW< [cifsoplockd]

14 root 0 SW< [cifsdnotifyd]

15 root 0 SW< [jfsIO]

16 root 0 SW< [jfsCommit]

17 root 0 SW< [jfsSync]

18 root 0 SW [mtdblockd]

37 root 0 SW< [ata/0]

39 root 0 SW< [scsi_eh_0]

42 root 0 SW< [scsi_eh_1]

43 root 0 SW< [usb-storage]

47 root 0 SWN [jffs2_gcd_mtd6]

52 root 2208 R telnetd

56 root 4024 S /usr/sbin/smbd -D -s /etc/samba/smb.conf

58 root 2204 S /usr/sbin/httpd -c /etc/httpd.conf

81 root 0 SW [EMBXSHM-NewPort]

82 root 0 SW [EMBXSHM-PortClo]

84 root 0 SW< [sTFDMA_ClbckMgr]

90 root 2440 S /bin/bash /etc/init.d/app_start start

95 root 2312 S /usr/sbin/vsftpd /etc/vsftpd.conf

96 root 234m S /root/bin/app

110 root 0 SW< [stpti4_IntTask]

111 root 0 SW< [stpti4_EvtTask]

112 root 0 SW< [sTCLKRV_Recover]

113 root 0 DW< [wd]

116 root 0 SW< [kblit_interrupt]

119 root 0 SW< [sTLAYER-GFX/CUR]

122 root 0 DW< [PESES0]

123 root 0 SW< [DEC0]

124 root 0 SW< [PP0]

125 root 0 SW< [PP1]

126 root 0 SW< [PCMPLAYER0]

127 root 0 SW< [PCMPLAYER1]

128 root 0 SW< [sPDIFPLAYER]

129 root 0 SW< [stuart_TimerTas]

130 root 0 SW< [stuart_TimerTas]

131 root 0 SW< [sMART_EventMana]

182 root 0 DW< [sTVOUT_STATE_MA]

183 root 0 SW< [sTVOUT_INFOFRAM]

184 root 0 SW< [sTLAYER-GFX/CUR]

185 root 0 SW< [sTLAYER-GFX/CUR]

236 root 1960 S /usr/sbin/inadyn

739 nobody 2416 S /usr/sbin/vsftpd /etc/vsftpd.conf

741 root 2440 S /usr/sbin/vsftpd /etc/vsftpd.conf

758 root 19480 S /var/bin/mgcamd

764 root 0 DW< [sTVID.InjecterT]

765 root 0 DW< [sTVID[0].Decode]

766 root 0 SW< [sTVID[0].Displa]

767 root 0 SW< [sTVID[0].TrickM]

768 root 0 SW< [sTVID[0].ErrorR]

769 root 0 SW< [HostRec4080000f]

770 root 0 SW< [HostRec40800010]

771 root 0 SW< [HostRec40800011]

772 root 2312 S -sh

773 root 2312 R ps ax

~ #

Ссылка на комментарий
Поделиться на другие сайты

758 root 19480 S /var/bin/mgcamd

Эмулятор в процессах есть, теперь пропишите в файле mg_cfg айпи компа и рестартаните эмулятор
Ссылка на комментарий
Поделиться на другие сайты

прописан давно еспи читали выше а рестануть тумблером то да только что и дальше что

Изменено пользователем paki7004
Ссылка на комментарий
Поделиться на другие сайты

paki7004

Читал, но я уверен, что после того, как прописали L: { 03 } 192.168.1.3 514 не сделали рестарт эмулятора

Ссылка на комментарий
Поделиться на другие сайты

paki7004

ну так лог вы видите или нет? что значит не могу снять, медиум уже спать пошёл, пишите подробнее!

Ссылка на комментарий
Поделиться на другие сайты

лог не вижу а telnet вот такой HD_PVR

=======

~ # ps as

PID USER VSZ STAT COMMAND

1 root 2204 S init

2 root 0 SW< [ksoftirqd/0]

3 root 0 SW< [events/0]

4 root 0 SW< [khelper]

5 root 0 SW< [kthread]

6 root 0 SW< [kblockd/0]

7 root 0 SW< [khubd]

8 root 0 SW< [kseriod]

9 root 0 SW [pdflush]

10 root 0 SW [pdflush]

11 root 0 SW [kswapd0]

12 root 0 SW< [aio/0]

13 root 0 SW< [cifsoplockd]

14 root 0 SW< [cifsdnotifyd]

15 root 0 SW< [jfsIO]

16 root 0 SW< [jfsCommit]

17 root 0 SW< [jfsSync]

18 root 0 SW [mtdblockd]

37 root 0 SW< [ata/0]

39 root 0 SW< [scsi_eh_0]

42 root 0 SW< [scsi_eh_1]

43 root 0 SW< [usb-storage]

47 root 0 SWN [jffs2_gcd_mtd6]

52 root 2208 S telnetd

56 root 4024 S /usr/sbin/smbd -D -s /etc/samba/smb.conf

58 root 2204 S /usr/sbin/httpd -c /etc/httpd.conf

81 root 0 SW [EMBXSHM-NewPort]

82 root 0 SW [EMBXSHM-PortClo]

84 root 0 SW< [sTFDMA_ClbckMgr]

90 root 2440 S /bin/bash /etc/init.d/app_start start

93 root 2312 S /usr/sbin/vsftpd /etc/vsftpd.conf

94 root 194m S /root/bin/app

110 root 0 SW< [stpti4_IntTask]

111 root 0 SW< [stpti4_EvtTask]

112 root 0 SW< [sTCLKRV_Recover]

113 root 0 DW< [wd]

116 root 0 SW< [kblit_interrupt]

119 root 0 SW< [sTLAYER-GFX/CUR]

122 root 0 DW< [PESES0]

123 root 0 SW< [DEC0]

124 root 0 SW< [PP0]

125 root 0 SW< [PP1]

126 root 0 SW< [PCMPLAYER0]

127 root 0 SW< [PCMPLAYER1]

128 root 0 SW< [sPDIFPLAYER]

129 root 0 SW< [stuart_TimerTas]

130 root 0 SW< [stuart_TimerTas]

131 root 0 SW< [sMART_EventMana]

182 root 0 DW< [sTVOUT_STATE_MA]

183 root 0 SW< [sTVOUT_INFOFRAM]

184 root 0 SW< [sTLAYER-GFX/CUR]

185 root 0 SW< [sTLAYER-GFX/CUR]

233 root 27844 S /var/bin/mgcamd

449 root 1960 S /usr/sbin/inadyn

800 root 0 DW< [sTVID.InjecterT]

801 root 0 SW< [sTVID[0].H264Pa]

802 root 0 SW< [sTVID[0].H264De]

803 root 0 SW< [sTVID.H264PP[0]]

804 root 0 SW< [HostRec4080000a]

805 root 0 DW< [sTVID[0].Produc]

806 root 0 SW< [sTVID[0].Displa]

807 root 0 SW< [sTVID[0].SpeedT]

808 root 0 SW< [sTVID[0].ErrorR]

811 root 0 SW< [HostRec4080000d]

813 root 0 SW< [HostRec4080000e]

814 root 0 SW< [HostRec4080000f]

821 root 2312 S -sh

822 root 2312 R ps as

~ #

Ссылка на комментарий
Поделиться на другие сайты

# EMM messages

# 00 don't show any EMMs (default)

# 01 show only valid EMMs

# 02 show valid and bad EMMs with complete data display

M: { 00 }

# ECM messages

# 00 don't show anything about ecm

# 01 normal mode, show pids processed, decoded ecm and cw

# 02 verbose mode, show valid and bad ECMs with data

C: { 00 }

# AU

# 00 disable, no emm pids processed

# 01 enable, emm pids always processed for soft-au and shared cards

# 02 auto, emm started only if channel cant be decoded

# 03 process emm pids for network cards update only

A: { 00 }

# key update (sum 01 or 02 with 04)

# 01 update only new keys, default setting

# 02 update all keys (used for valid PMK checking)

# 04 enable TPS au

U: { 00 }

# config files folder (softcam, autoroll, ignore/priority)

# 00 files in /var/keys

# 01 files in /tmp

T: { 00 }

# network mode, use summ for several clients

# 00 no network (default)

# 01 newcamd netclient

# 02 radegast netclient

# 04 camd3 netclient

# 08 gbox netclient

G: { 01 }

# network retry, use summ for several options

# 00 disable

# 01 retry every new ecm

# 02 try to connect to offline shares every Q: seconds

# 04 try to detect and fast reconnect to lost (and not used atm) server

# + XX messages number and YY seconds to reconnect

# mg will reconnect to server, if no answer to last XX ecm/keepalive or

# if no answer for last ecm or keepalive sent for YY seconds

# set to 0 to disable

N: { 07 } 5 30

# network ecm timeout in seconds

K: { 05 }

# newcamd dead routes connect retry, sec

Q: { 100 }

# network shares priority

# 00 gbox, newcamd, radegast, camd3 (default)

# 01 camd3, radegast, newcamd, gbox

# 02 newcamd, camd3, gbox, radegast

P: { 02 }

# on screen display type

# 00 No OSD (default)

# 01 neutrino

# 02 enigma

# 03 relook

# + user password for http auth

O: { 00 } username password

# on screen display Options, summ of:

# 01 show emu ecm

# 02 show network shares messages

# 04 show decoding failed / fta

# 08 show emm keys update

# + web port to use for osd

S: { 03 } 80

# Log option, summ of:

# 00 off

# 01 network udp log

# 02 log to console

# 04 file, appended ! delete it by yourself, before it eat all your hdd

# + IP udp-port log-file-name

L: { 03 } 192.168.1.3 514 /tmp/mgcamd.log

# keep ecm cache, seconds

# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

# for openbox/elanvision users with remote shares make sense to set it higher than default value,

# to not hammer cards while timeshifting or playing crypted recordings.

E: { 15 }

# cache option, summ of:

# 00 Off (default)

# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

# 02 Ecm data cache, remember CW for (E:) time

# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

H: { 07 }

# reread files, summ of:

# 00 No (default)

# 01 reread config file on channel change (including priority and ignore, but not replace/cache)

# 02 reread SoftCam.Key on channel change

# 04 reread SoftCam.Key if file changed

R: { 00 }

# debug, summ of

# 00 off (default)

# 01 debug ecm

# 02 debug emm

# 04 debug network ecm

# 08 debug network emm

# 16 debug network login

# 32 show mem/cpu stats every 1 min

# 64 add timestamp to log messages

D: { 00 }

# box type

# 00 autodetect, change only if you think wrong type detected.

# 01 dbox2

# 02 dreambox

# 03 triple-dragon

# 04 relook

# 05 openbox

B: { 12 }

Ссылка на комментарий
Поделиться на другие сайты

Кто нибудь знает почему на канале 1+1 Sirius нет звука.Ключи пробывал с разных источников.Эфект один и тот же.Немое кино.

Прошивку от 20.05.2010 v1.08.22 - Beta

Меню 8282 сброси ключи

выкл встр.слот карт -рестарт - (1+1) и звук ecть <_<

VU+Solo2

Ссылка на комментарий
Поделиться на другие сайты

paki7004

mg_cfg

# EMM messages

# 00 don't show any EMMs (default)

# 01 show only valid EMMs

# 02 show valid and bad EMMs with complete data display

M: { 01 }

# ECM messages

# 00 don't show anything about ecm

# 01 normal mode, show pids processed, decoded ecm and cw

# 02 verbose mode, show valid and bad ECMs with data

C: { 01 }

# AU

# 00 disable, no emm pids processed

# 01 enable, emm pids always processed for soft-au and shared cards

# 02 auto, emm started only if channel cant be decoded

# 03 process emm pids for network cards update only

A: { 01 }

# key update (sum 01 or 02 with 04)

# 01 update only new keys, default setting

# 02 update all keys (used for valid PMK checking)

# 04 enable TPS au

U: { 05 }

# config files folder (softcam, autoroll, ignore/priority)

# 00 files in /var/keys

# 01 files in /tmp

T: { 00 }

# network mode, use summ for several clients

# 00 no network (default)

# 01 newcamd netclient

# 02 radegast netclient

# 04 camd3 netclient

# 08 gbox netclient

G: { 01 }

# network retry, use summ for several options

# 00 disable

# 01 retry every new ecm

# 02 try to connect to offline shares every Q: seconds

# 04 try to detect and fast reconnect to lost (and not used atm) server

# + XX messages number and YY seconds to reconnect

# mg will reconnect to server, if no answer to last XX ecm/keepalive or

# if no answer for last ecm or keepalive sent for YY seconds

# set to 0 to disable

N: { 07 } 5 30

# network ecm timeout in seconds

K: { 10 }

# newcamd dead routes connect retry, sec

Q: { 600 }

# network shares priority

# 00 gbox, newcamd, radegast, camd3 (default)

# 01 camd3, radegast, newcamd, gbox

# 02 newcamd, camd3, gbox, radegast

P: { 00 }

# on screen display type

# 00 No OSD (default)

# 01 neutrino

# 02 enigma

# 03 relook

# + user password for http auth

O: { 00 } username password

# on screen display Options, summ of:

# 01 show emu ecm

# 02 show network shares messages

# 04 show decoding failed / fta

# 08 show emm keys update

# + web port to use for osd

S: { 03 } 80

# Log option, summ of:

# 00 off

# 01 network udp log

# 02 log to console

# 04 file, appended ! delete it by yourself, before it eat all your hdd

# + IP udp-port log-file-name

L: { 03 } 192.168.1.205 514 /tmp/mgcamd.log

# keep ecm cache, seconds

# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

# for openbox/elanvision users with remote shares make sense to set it higher than default value,

# to not hammer cards while timeshifting or playing crypted recordings.

E: { 15 }

# cache option, summ of:

# 00 Off (default)

# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

# 02 Ecm data cache, remember CW for (E:) time

# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

H: { 00 }

# reread files, summ of:

# 00 No (default)

# 01 reread config file on channel change (including priority and ignore, but not replace/cache)

# 02 reread SoftCam.Key on channel change

# 04 reread SoftCam.Key if file changed

R: { 00 }

# debug, summ of

# 00 off (default)

# 01 debug ecm

# 02 debug emm

# 04 debug network ecm

# 08 debug network emm

# 16 debug network login

# 32 show mem/cpu stats every 1 min

# 64 add timestamp to log messages

D: { 00 }

# box type

# 00 autodetect, change only if you think wrong type detected.

# 01 dbox2

# 02 dreambox

# 03 triple-dragon

# 04 relook

# 05 openbox

B: { 12 }

F: { 00 }

MULTI=1

Ссылка на комментарий
Поделиться на другие сайты

этот файл mg_cfg для чего он мне, мне нужно посмотреть свой лог а я немогу не с вашем не со своим

Изменено пользователем paki7004
Ссылка на комментарий
Поделиться на другие сайты

paki7004

а прописать свой IP компа в тот что я вам дал вы пробовали? Антивирь на компе и фаерволы отключили?

Ссылка на комментарий
Поделиться на другие сайты

paki7004

ну вот теперь если есть проблемы, то уже с логом в тему по настройке шаринга!!!

Ссылка на комментарий
Поделиться на другие сайты

Добрый день! У меня ресивер Skyway Classic, вчера вечером стал глючить пульт ДУ, красная кнопка на пульте то горит то не горит. Пульт работает через раз на расстоянии от ресивера 10-30 см, батарейки поменял, ничего не изменилось! Были у кого такие проблемы? Заранее спасибо!

Ссылка на комментарий
Поделиться на другие сайты

Добрый день! У меня ресивер Skyway Classic, вчера вечером стал глючить пульт ДУ, красная кнопка на пульте то горит то не горит. Пульт работает через раз на расстоянии от ресивера 10-30 см, батарейки поменял, ничего не изменилось! Были у кого такие проблемы? Заранее спасибо!

разберите его и протрите спиртом контактные площадки на плате и сами резинки.
Ссылка на комментарий
Поделиться на другие сайты

разберите его и протрите спиртом контактные площадки на плате и сами резинки.

Нельзя резинки протирать спиртом, можно стереть напыление на них. Рекомендуется протирать только водой.

Skyway Classic + wicardd 4W,0.8W,4.8Е,9Е,13E,16E,19.2E,23.5E,31.5E,36E,55E,60E,75Е,85E,90E
ItGate 220 + mgcamd 1.31 13E,36E,75E,85E,90E

Ссылка на комментарий
Поделиться на другие сайты

Нельзя резинки протирать спиртом, можно стереть напыление на них. Рекомендуется протирать только водой.

Ресиверу всего 2 недели! Других причин кроме грязи в пульте, не может быть?
Ссылка на комментарий
Поделиться на другие сайты

тюнер зависает и-за плагина userRAN,его необходимо отключать при сканировании.

спасибо ,а то я читал где то и забыл где ,пока самого не клюнул :D

90(C+ку)+85+80C+75+60+53+45+36+13+9+5 Gi S8895(openpli 3.0 ))   VU+ solo 2 (openpli 3.0 )

Ссылка на комментарий
Поделиться на другие сайты

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать учетную запись

Зарегистрируйте новую учётную запись в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
×
×
  • Создать...