Перейти к содержанию
cbilling заблокирован? Узнайте как получить актуальное зеркало!

jazzl0ver

Пользователи
 Профиль  Обзор контента

  • Постов

    6

  • Зарегистрирован

  • Посещение

 Тип контента 

Сообщения, опубликованные jazzl0ver

    Просмотр НТВ+ Hd и тормоза видео

    в DVB карты (SkyStar, TwinHan, Acorp, Prof и др.)

    Опубликовано

    да, я об этом думал. смущает то, что хд-каналы с другого транспондера принимаются моей картой без проблем. в общем на выхах попробую поставить полноценный ресивер - посмотрю.

    в общем, резюмирую (мало ли кому пригодится):

    1. поставил "железный" ресивер - все каналы показываются отлично

    2. на ресивере выбрал канал на "проблемном" транспондере, отключил ресивер и подключил карту - канал отлично показывается!

    3. после переключения на другой транспондер и возврата обратно на "проблемный", опять перестало показывать (точнее, картинка в цветных квадратиках, сыпется и пр.)

    4. подождав несколько минут, обнаружил, что картинка потихоньку восстанавливается! в конце остается только легкое подрагивание (как будто что-то не может синхронизироваться). еще раз выбрав текущий канал, подрагивание исчезло, картинка - супер.

    Просмотр НТВ+ Hd и тормоза видео

    в DVB карты (SkyStar, TwinHan, Acorp, Prof и др.)

    Опубликовано

    jazzl0ver

    ты забыл,учесть,один нюанс - "карты" намного хуже чувствительнее ,нежели ресиверы...

    т.е. сигнал для них нужен на порядок(10-15%) выше!

    да, я об этом думал. смущает то, что хд-каналы с другого транспондера принимаются моей картой без проблем. в общем на выхах попробую поставить полноценный ресивер - посмотрю.

    Просмотр НТВ+ Hd и тормоза видео

    в DVB карты (SkyStar, TwinHan, Acorp, Prof и др.)

    Опубликовано

    jazzl0ver

    перенастрой точнее тарелку,т.к. зона покрытия w7 http://www.eutelsat.com/satellites/36e-w7_popd.html

    немного отличается от зоны покрытия w4 http://www.eutelsat.com/satellites/36ew4_popd.html

    и Krad прав,когда писал:

    если тарелочка 50-60 см - то размер явно за маленький,советую увеличить до 90 см и настраивать уже по транспондерам w7

    80см. об этом написано в 1-м посте

    Просмотр НТВ+ Hd и тормоза видео

    в DVB карты (SkyStar, TwinHan, Acorp, Prof и др.)

    Опубликовано

    Ну чтож, попробую угадать.... во первых где вы проживаете? на тарелку 80см.. сигнал по идее должне быть посильнее.. во вторых могу предположить что инет ваш комп получает с мобильника или с флешки-модема... попробуйте убрать мобильник либо что там у вас подальше от системника с помощью ЮСБ удлинителя...

    не угадали. инет - по кабелю

    Просмотр НТВ+ Hd и тормоза видео

    в DVB карты (SkyStar, TwinHan, Acorp, Prof и др.)

    Опубликовано

    Прошу помощи. Windows XP SP3, установлена карта Prof 7300 (драйвер 1.1.0.7), тарелка 0.8м, принимаю НТВ+ 36Е. Все транспондеры принимаются отлично, в том числе HD-каналы на tp12073. altdvb, например, показывает уровень сигнала 89% и качество 100%.

    Но вот на новом транспондере 11823 творится непонятное: либо картинки совсем нет, либо она "рассыпается". Через DVBViewer удалось обнаружить, что на этом транспондере (на любом канале) постоянно растет параметр discontinuity. Для сравнения, на любом HD-канале с другого транспондера (12073) - discouninuity постоянно равен 0.

    Что это может быть? Куда копать?

    Кардшаринг на Dvb картах под Linux

    в DVB карты (SkyStar, TwinHan, Acorp, Prof и др.)

    Опубликовано

    Прошу помощи. Использую sasc-ng в связке с VLC или VDR. Лог саска для работающего канала (частота 12265, программа 31005):

    Apr 14 18:47:23.363 CHANNEL: Clearing tuning cache due to switch cmd
Apr 14 18:47:23.419 CHANNEL: Tuning frontend
Apr 14 18:47:23.421 CSA: Got command(1): I idx: 0 pid: 0
Apr 14 18:47:23.423 demux: Opened fd: 0=14 mode: 100002
Apr 14 18:47:23.646 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Orbit: 00000360E
Apr 14 18:47:24.744 demux: Opened fd: 1=15 mode: 100002
Apr 14 18:47:24.751 demux: Opened fd: 2=16 mode: 100002
Apr 14 18:47:24.755 demux: Opened fd: 3=17 mode: 100002
Buffer has room, reading 1880 bytes
Returning 1880
Apr 14 18:47:24.932 demux: Opened fd: 4=18 mode: 100002
Apr 14 18:47:24.937 CAM(core.pids): 0: now tuned to source 8968(S36.0E) transponder 64aa2
Apr 14 18:47:24.940 CAM: SC completed  Tune cmd
Apr 14 18:47:24.942 CAM(core.pids): 0: update SID 31005 (zero=0 noshift=0)
Apr 14 18:47:24.944 CAM(core.pids): 0: pids typ5=0145 typ5=0195
Apr 14 18:47:24.945 CAM(core.pids): SimplyCa entry pidCa=0
Apr 14 18:47:24.951 CAM(core.pids): prgca: 09 0F 05 00 E7 D5 10 01 00 13 01 20 14 03 04 06 00 09 0F 05 00 F3 8D 10 01 00 13 01 20 14 03 04 06 10 09 0F 05 00 EF A5 10 01 00 13 01 20 14 03 02 37 00 09 0F 05 00 EB BD 10 01 00 13 01 20 14 03 03 06 00
Apr 14 18:47:24.953 CAM(core.pids): pidca 0145: <empty>
Apr 14 18:47:24.954 CAM(core.pids): pidca 0195: <empty>
Apr 14 18:47:24.956 CAM(core.pids): SimplyCa exit pidCa=0
Apr 14 18:47:24.959 CAM(core.pids): prgca: 09 0F 05 00 E7 D5 10 01 00 13 01 20 14 03 04 06 00 09 0F 05 00 F3 8D 10 01 00 13 01 20 14 03 04 06 10 09 0F 05 00 EF A5 10 01 00 13 01 20 14 03 02 37 00 09 0F 05 00 EB BD 10 01 00 13 01 20 14 03 03 06 00
Apr 14 18:47:24.961 CAM(core.pids): pidca 0145: <empty>
Apr 14 18:47:24.962 CAM(core.pids): pidca 0195: <empty>
Apr 14 18:47:24.964 CAM(core.pids): 0: SID=31005 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Apr 14 18:47:24.966 CAM(core.pids): 0: found handler for SID 31005 (0.1 idle=1 idx=1)
Apr 14 18:47:24.971 CAM(core.ecm): 0.1: setting new SID 31005
Apr 14 18:47:24.973 CAM(core.pids): 0.1: pids on entry
Apr 14 18:47:24.974 CAM(core.pids): 0.1: pids after delete
Apr 14 18:47:24.976 CAM(core.pids): 0: descrambling pid 0145 on index 1
Called cSascDvbDevice::SetCaPid
Apr 14 18:47:24.981 demux: Opened fd: 5=19 mode: 100002
Apr 14 18:47:24.981 CSA: Got command(1): P idx: 1 pid: 325
Apr 14 18:47:24.992 CAM(core.pids): 0: descrambling pid 0195 on index 1
Called cSascDvbDevice::SetCaPid
Apr 14 18:47:24.997 CSA: Got command(1): P idx: 1 pid: 405
Apr 14 18:47:24.998 CAM(core.pids): 0.1: pids after add typ5=0145 typ5=0195
Apr 14 18:47:25.000 CAM(core.ecm): 0.1: is no longer idle
Apr 14 18:47:25.002 MSG: Got unprocessed message type: 1
Apr 14 18:47:25.071 CAM(core.ecm): 0.1: triggered SID -1/31005 idx -1/1 mode -1/0 -
Apr 14 18:47:25.074 CAM(core.ecm): 0.1: new caDescr: 09 0F 05 00 E7 D5 10 01 00 13 01 20 14 03 04 06 00 09 0F 05 00 F3 8D 10 01 00 13 01 20 14 03 04 06 10 09 0F 05 00 EF A5 10 01 00 13 01 20 14 03 02 37 00 09 0F 05 00 EB BD 10 01 00 13 01 20 14 03 03 06 00
Apr 14 18:47:25.075 CAM(core.ecm): 0.1: CA descriptors for SID 31005 (len=68)
Apr 14 18:47:25.077 CAM(core.ecm): 0.1: descriptor 05 00 e7 d5 10 01 00 13 01 20 14 03 04 06 00
Apr 14 18:47:25.079 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 40600 with ecm 7d5/80 (new)
Apr 14 18:47:25.080 CAM(core.ecm): 0.1: descriptor 05 00 f3 8d 10 01 00 13 01 20 14 03 04 06 10
Apr 14 18:47:25.082 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 40610 with ecm 138d/80 (new)
Apr 14 18:47:25.083 CAM(core.ecm): 0.1: descriptor 05 00 ef a5 10 01 00 13 01 20 14 03 02 37 00
Apr 14 18:47:25.085 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 23700 with ecm fa5/80 (new)
Apr 14 18:47:25.086 CAM(core.ecm): 0.1: descriptor 05 00 eb bd 10 01 00 13 01 20 14 03 03 06 00
Apr 14 18:47:25.088 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 30600 with ecm bbd/80 (new)
Apr 14 18:47:25.089 CAM(core.ecm): 0.1: try system Viaccess (0500) id 40600 with ecm 7d5 (pri=-10)
Apr 14 18:47:25.145 CAM(core.au): 0: chain caid 0500 -> Viaccess(-10) Cardclient(-15) [03e8-8b/fe/07]
Apr 14 18:47:25.149 CAM(core.au): 0: chain caid 0500 ++ [03e8-8b/fe/07] [03ed-8b/fe/07]
Apr 14 18:47:25.151 CAM(core.au): 0: chain caid 0500 ++ [03e8-8b/fe/07] [03ed-8b/fe/07] [03eb-8b/fe/07]
Apr 14 18:47:25.152 CAM(core.au): 0: chain caid 0500 ++ [03e8-8b/fe/07] [03ed-8b/fe/07] [03eb-8b/fe/07] [03ec-8b/fe/07]
Apr 14 18:47:25.154 CAM(core.au): 0: starting chain 0500
Apr 14 18:47:25.213 CAM(core.ecm): system: no key found for V 040600 08
Apr 14 18:47:25.604 CAM(core.ecm): 0.1: try system Viaccess (0500) id 40610 with ecm 138d (pri=-10)
Apr 14 18:47:26.807 CAM(core.ecm): 0.1: try system Viaccess (0500) id 23700 with ecm fa5 (pri=-10)
Apr 14 18:47:27.009 CAM(core.ecm): system: no key found for V 023700 08
Apr 14 18:47:27.415 CAM(core.ecm): 0.1: try system Viaccess (0500) id 30600 with ecm bbd (pri=-10)
Apr 14 18:47:27.941 CAM(core.ecm): 0.1: try system Cardclient (0500) id 40600 with ecm 7d5 (pri=-15)
Apr 14 18:47:28.009 CAM(cardclient.core): cc-loop
Apr 14 18:47:28.011 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:47:28.643 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:28.648 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (635 ms)
Apr 14 18:47:28.650 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:47:28.895 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:28.898 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9024) ECM failed (247 ms)
Apr 14 18:47:28.901 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9025)
Apr 14 18:47:28.942 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:28.944 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9025) ECM failed (42 ms)
Apr 14 18:47:28.945 CAM(cardclient.core): cc-loop
Apr 14 18:47:28.947 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:47:28.988 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:28.990 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (41 ms)
Apr 14 18:47:28.992 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:47:29.034 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.037 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9024) ECM failed (44 ms)
Apr 14 18:47:29.039 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9025)
Apr 14 18:47:29.081 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.082 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9025) ECM failed (41 ms)
Apr 14 18:47:29.084 CAM(core.ecm): 0.1: try system Cardclient (0500) id 40610 with ecm 138d (pri=-15)
Apr 14 18:47:29.211 CAM(cardclient.core): cc-loop
Apr 14 18:47:29.214 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:47:29.259 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.261 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (46 ms)
Apr 14 18:47:29.263 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:47:29.310 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.312 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9024) ECM failed (47 ms)
Apr 14 18:47:29.314 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9025)
Apr 14 18:47:29.358 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.361 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9025) ECM failed (45 ms)
Apr 14 18:47:29.616 CAM(cardclient.core): cc-loop
Apr 14 18:47:29.619 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:47:29.663 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.665 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (44 ms)
Apr 14 18:47:29.669 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:47:29.715 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.717 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9024) ECM failed (46 ms)
Apr 14 18:47:29.719 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9025)
Apr 14 18:47:29.762 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:47:29.765 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9025) ECM failed (44 ms)
Apr 14 18:47:30.008 CAM(core.ecm): 0.1: try system Cardclient (0500) id 23700 with ecm fa5 (pri=-15)
Apr 14 18:47:30.211 CAM(cardclient.core): cc-loop
Apr 14 18:47:30.214 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Called cSascDvbDevice::SetCaDescr
Apr 14 18:47:30.259 CSA: Got command(1): E idx: 1 pid: 0 key: a02e...12
Called cSascDvbDevice::SetCaDescr
Apr 14 18:47:30.263 CSA: Got command(1): O idx: 1 pid: 0 key: e6d1...c3
Apr 14 18:47:30.265 CAM(core.ecm): cache add prgId=31005 source=8968 transponder=64aa2 ecm=fa5/80
Apr 14 18:47:30.267 CAM(core.ecm): 0.1: correct key found
Apr 14 18:47:30.278 CSA: Creating csa for rb: 1
Apr 14 18:47:31.421 CAM(core.load): saved ecm cache to /usr/local/etc/camfiles/ecm.cache
Called cSascDvbDevice::SetCaDescr
Apr 14 18:47:31.464 CSA: Got command(1): O idx: 1 pid: 0 key: c2b1...82
    А вот пытаюсь открыть другой канал (частота 12437, программа 10404):

    Apr 14 18:51:30.962 CHANNEL: Clearing tuning cache due to switch cmd
Apr 14 18:51:31.017 CHANNEL: Tuning frontend
Apr 14 18:51:31.020 CSA: Got command(1): I idx: 0 pid: 0
Apr 14 18:51:31.021 demux: Opened fd: 0=14 mode: 100002
Apr 14 18:51:31.249 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Apr 14 18:51:31.661 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Apr 14 18:51:32.073 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Orbit: 00000360E
Apr 14 18:51:33.210 demux: Opened fd: 1=15 mode: 100002
Apr 14 18:51:33.216 demux: Opened fd: 2=16 mode: 100002
Apr 14 18:51:33.221 demux: Opened fd: 3=17 mode: 100002
Apr 14 18:51:33.355 demux: Opened fd: 4=18 mode: 100002
Apr 14 18:51:33.358 CAM(core.pids): 0: now tuned to source 8968(S36.0E) transponder 64aa2
Apr 14 18:51:33.363 CAM: SC completed  Tune cmd
Apr 14 18:51:33.365 CAM(core.pids): 0: update SID 10404 (zero=0 noshift=0)
Apr 14 18:51:33.368 CAM(core.pids): 0: pids typ5=0144 typ5=0194
Apr 14 18:51:33.370 CAM(core.pids): SimplyCa entry pidCa=0
Apr 14 18:51:33.372 CAM(core.pids): prgca: 09 0F 05 00 E7 D4 10 01 00 13 01 20 14 03 04 06 00 09 0F 05 00 EB BC 10 01 00 13 01
 20 14 03 03 06 00 09 0F 05 00 F3 8C 10 01 00 13 01 20 14 03 04 06 10 09 0F 05 00 EF A4 10 01 00 13 01 20 14 03 02 37 00
Apr 14 18:51:33.374 CAM(core.pids): pidca 0144: <empty>
Apr 14 18:51:33.376 CAM(core.pids): pidca 0194: <empty>
Apr 14 18:51:33.378 CAM(core.pids): SimplyCa exit pidCa=0
Apr 14 18:51:33.379 CAM(core.pids): prgca: 09 0F 05 00 E7 D4 10 01 00 13 01 20 14 03 04 06 00 09 0F 05 00 EB BC 10 01 00 13 01
 20 14 03 03 06 00 09 0F 05 00 F3 8C 10 01 00 13 01 20 14 03 04 06 10 09 0F 05 00 EF A4 10 01 00 13 01 20 14 03 02 37 00
Apr 14 18:51:33.382 CAM(core.pids): pidca 0144: <empty>
Apr 14 18:51:33.383 CAM(core.pids): pidca 0194: <empty>
Apr 14 18:51:33.385 CAM(core.pids): 0: SID=10404 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Apr 14 18:51:33.387 CAM(core.pids): 0: found handler for SID 10404 (0.1 idle=1 idx=1)
Apr 14 18:51:33.389 CAM(core.ecm): 0.1: setting new SID 10404
Apr 14 18:51:33.391 CAM(core.pids): 0.1: pids on entry
Apr 14 18:51:33.393 CAM(core.pids): 0.1: pids after delete
Apr 14 18:51:33.395 CAM(core.pids): 0: descrambling pid 0144 on index 1
Called cSascDvbDevice::SetCaPid
Apr 14 18:51:33.400 CSA: Got command(1): P idx: 1 pid: 324
Apr 14 18:51:33.402 CAM(core.pids): 0: descrambling pid 0194 on index 1
Called cSascDvbDevice::SetCaPid
Apr 14 18:51:33.407 CSA: Got command(1): P idx: 1 pid: 404
Apr 14 18:51:33.410 CAM(core.pids): 0.1: pids after add typ5=0144 typ5=0194
Apr 14 18:51:33.411 CAM(core.ecm): 0.1: is no longer idle
Apr 14 18:51:33.478 CAM(core.ecm): 0.1: triggered SID -1/10404 idx -1/1 mode -1/0 -
Apr 14 18:51:33.533 CAM(core.ecm): 0.1: new caDescr: 09 0F 05 00 E7 D4 10 01 00 13 01 20 14 03 04 06 00 09 0F 05 00 EB BC 10 0
1 00 13 01 20 14 03 03 06 00 09 0F 05 00 F3 8C 10 01 00 13 01 20 14 03 04 06 10 09 0F 05 00 EF A4 10 01 00 13 01 20 14 03 02 3
7 00
Apr 14 18:51:33.535 CAM(core.ecm): 0.1: CA descriptors for SID 10404 (len=68)
Apr 14 18:51:33.537 CAM(core.ecm): 0.1: descriptor 05 00 e7 d4 10 01 00 13 01 20 14 03 04 06 00
Apr 14 18:51:33.539 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 40600 with ecm 7d4/80 (new)
Apr 14 18:51:33.540 CAM(core.ecm): 0.1: descriptor 05 00 eb bc 10 01 00 13 01 20 14 03 03 06 00
Apr 14 18:51:33.542 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 30600 with ecm bbc/80 (new)
Apr 14 18:51:33.544 CAM(core.ecm): 0.1: descriptor 05 00 f3 8c 10 01 00 13 01 20 14 03 04 06 10
Apr 14 18:51:33.546 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 40610 with ecm 138c/80 (new)
Apr 14 18:51:33.547 CAM(core.ecm): 0.1: descriptor 05 00 ef a4 10 01 00 13 01 20 14 03 02 37 00
Apr 14 18:51:33.549 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 23700 with ecm fa4/80 (new)
Apr 14 18:51:33.551 CAM(core.ecm): 0.1: try system Viaccess (0500) id 40600 with ecm 7d4 (pri=-10)
Apr 14 18:51:33.521 demux: Opened fd: 5=20 mode: 100002
Apr 14 18:51:33.558 CAM(core.au): 0: chain caid 0500 -> Viaccess(-10) Cardclient(-15) [03e8-8b/fe/07]
Apr 14 18:51:33.567 CAM(core.au): 0: chain caid 0500 ++ [03e8-8b/fe/07] [03eb-8b/fe/07]
Apr 14 18:51:33.569 CAM(core.au): 0: chain caid 0500 ++ [03e8-8b/fe/07] [03eb-8b/fe/07] [03ec-8b/fe/07]
Apr 14 18:51:33.572 CAM(core.au): 0: chain caid 0500 ++ [03e8-8b/fe/07] [03eb-8b/fe/07] [03ec-8b/fe/07] [03ed-8b/fe/07]
Apr 14 18:51:33.574 CAM(core.au): 0: starting chain 0500
Apr 14 18:51:33.560 MSG: Got unprocessed message type: 1
Apr 14 18:51:33.719 CAM(core.ecm): system: no key found for V 040600 08
Apr 14 18:51:34.124 CAM(core.ecm): 0.1: try system Viaccess (0500) id 30600 with ecm bbc (pri=-10)
Apr 14 18:51:34.814 CAM(core.ecm): 0.1: try system Viaccess (0500) id 40610 with ecm 138c (pri=-10)
Apr 14 18:51:35.421 CAM(core.ecm): 0.1: try system Viaccess (0500) id 23700 with ecm fa4 (pri=-10)
Apr 14 18:51:35.597 CAM(core.ecm): system: no key found for V 023700 08
Apr 14 18:51:36.003 CAM(core.ecm): 0.1: try system Cardclient (0500) id 40600 with ecm 7d4 (pri=-15)
Apr 14 18:51:36.124 CAM(cardclient.core): cc-loop
Apr 14 18:51:36.127 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:51:36.170 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:51:36.172 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (43 ms)
Apr 14 18:51:36.174 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:51:36.217 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:51:36.220 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9024) ECM failed (44 ms)
Apr 14 18:51:36.222 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9025)
Apr 14 18:51:36.264 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:51:36.267 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9025) ECM failed (42 ms)
Apr 14 18:51:36.327 CAM(cardclient.core): cc-loop
Apr 14 18:51:36.333 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:51:36.376 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:51:36.378 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (43 ms)
Apr 14 18:51:36.380 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:51:36.420 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:51:36.423 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9024) ECM failed (41 ms)
Apr 14 18:51:36.425 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9025)
Apr 14 18:51:36.466 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel
Apr 14 18:51:36.468 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9025) ECM failed (42 ms)
Apr 14 18:51:36.515 CAM(core.ecm): 0.1: try system Cardclient (0500) id 30600 with ecm bbc (pri=-15)
Apr 14 18:51:36.827 CAM(cardclient.core): cc-loop
Apr 14 18:51:36.830 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9011)
Apr 14 18:51:56.856 CAM(core.net): socket: select timed out (20000 ms)
Apr 14 18:51:56.882 CAM(cardclient.core): recv error. reconnecting...
Apr 14 18:51:56.884 CAM(cardclient.newcamd): failed to read message length
Apr 14 18:51:56.886 CAM(cardclient.newcamd): unexpected server response (code 0)
Apr 14 18:51:56.888 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (20056 ms)
Apr 14 18:51:56.889 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Read Failed: Success
Read Failed: Success
Read Failed: Success
Read Failed: Success
...
Read Failed: Success
Apr 14 18:52:57.327 CAM(core.net): socket: select timed out (20000 ms)
Apr 14 18:52:57.332 CAM(cardclient.core): recv error. reconnecting...
Read Failed: Success
Apr 14 18:52:57.334 CAM(cardclient.newcamd): failed to read message length
Apr 14 18:52:57.340 CAM(cardclient.newcamd): unexpected server response (code 0)
Apr 14 18:52:57.341 CAM(cardclient.core): client Newcamd (85.ххх.ххх.ххх:9011) ECM failed (20197 ms)
Apr 14 18:52:57.342 CAM(cardclient.core): now trying client Newcamd (85.ххх.ххх.ххх:9024)
Apr 14 18:52:57.344 CAM(core.net): connecting to 85.ххх.ххх.ххх:9024/tcp (85.ххх.ххх.ххх)
    Под длинный ECM патчил. Плюсовые футбол и хд-спорт - работают. А хд-кино и спорт-онлайн - нет..

    Есть идеи?

    PS VDR 1.7.14, sasc-ng - последний из меркуриала

×
×
  • Создать...