stast

Кембридж, с модемом прошил прошивкой om060410.crp (у меная опенбокс800) из софт2010 архива.

Лампочки горят две желтая и красная, зеленая не загорается. хотел попробовать другие прошивки с других сайтов пишет при прошивке Key is bad.

деньги на счету есть, вот такой кембридж http://sat.volyatv.com.ua/goods/cambrige-g...-modemom-sim300

в программе boot скорость не поменяешь, в файлах config правил - сбрасывается на 57600. скорость порта самого менял - не помогло

может то потому что usb-com у меня шнур, хотя с камбриджем отлмчно работат!

с помощюь программы boot пытаюсь залить прошивку в устройство, когда пишет подключить питание то не определяет какая версия по в моем ланкомбоксе, потом выбираю прошивку (пробовал разные) и начинается

Erase flash

Erase error...

как же залить ПО в устройтво

stast

а вы уверены что это ланкомбокс? Может это под ресивер эмо приблуда, тогда вам она не подходит!

эммм ну , а это что такое?

у меня с одной стороны com с другой разьем лан с лампочками и рядом питание. + на приборе лампочка

Купил на радиорынке ланкомбокс в белой коробке без инструкции и прочего, пришлось спаять питание самому, питаю от ресивера. лампочка зеленая на нем зажглась. а вот в гипертерминале после нажатия "." ничего и в putty так же.

57600 и аппаратное-нет написано, подключаю через юсб-ком, камбридж настроился без проблем.

как проверить где проблема?

Добрый день есть дсл 2300у, провайдер ЮТК (ппое соедеинение) и роутер дир320 с прошивкой от дантеса (23.03.2010),

мне просто нужно по ВАЙФАЙ интернет раздавать.

Как бы это сделать

телефонный шнур-адслмодем-езернет шнур-ванпорт 320го- настройки - нетворк-ппое- логин-пароль мту-1492... интенет не идет... =(

Покажи лог работы мпскс или постучи в аську 475585355 - разберемся.

Огромное спасибо, оперативно помог разобраться с проблемой

никак что-то:

Jan 1 00:00:13 OpenWrt user.info kernel: NET: Registered protocol family 1

Jan 1 00:00:13 OpenWrt user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher

Jan 1 00:00:13 OpenWrt user.warn kernel: Registering mini_fo version $Id$

Jan 1 00:00:13 OpenWrt user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

Jan 1 00:00:13 OpenWrt user.info kernel: msgmni has been set to 57

Jan 1 00:00:13 OpenWrt user.info kernel: alg: No test for stdrng (krng)

Jan 1 00:00:13 OpenWrt user.info kernel: io scheduler noop registered

Jan 1 00:00:13 OpenWrt user.info kernel: io scheduler deadline registered (default)

Jan 1 00:00:13 OpenWrt user.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: b44.c:v2.0

Jan 1 00:00:13 OpenWrt user.info kernel: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:90:4c:c0:00:00

Jan 1 00:00:13 OpenWrt user.warn kernel: flash init: 0x1c000000 0x02000000

Jan 1 00:00:13 OpenWrt user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040

Jan 1 00:00:13 OpenWrt user.warn kernel: Physically mapped flash: Swapping erase regions for broken CFI table.

Jan 1 00:00:13 OpenWrt user.notice kernel: number of CFI chips: 1

Jan 1 00:00:13 OpenWrt user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Jan 1 00:00:13 OpenWrt user.notice kernel: Flash device: 0x400000 at 0x1fc00000

Jan 1 00:00:13 OpenWrt user.notice kernel: bootloader size: 262144

Jan 1 00:00:13 OpenWrt user.notice kernel: Creating 4 MTD partitions on "Physically mapped flash":

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x000000000000-0x000000040000 : "cfe"

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x000000040000-0x0000003f0000 : "linux"

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x000000112c00-0x0000003f0000 : "rootfs"

Jan 1 00:00:13 OpenWrt user.warn kernel: mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

Jan 1 00:00:13 OpenWrt user.notice kernel: mtd: partition "rootfs" set to be root filesystem

Jan 1 00:00:13 OpenWrt user.info kernel: mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x0000003a0000-0x0000003f0000 : "rootfs_data"

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x0000003f0000-0x000000400000 : "nvram"

Jan 1 00:00:13 OpenWrt user.info kernel: BCM47xx Watchdog Timer enabled (30 seconds, nowayout)

Jan 1 00:00:13 OpenWrt user.info kernel: TCP westwood registered

Jan 1 00:00:13 OpenWrt user.info kernel: NET: Registered protocol family 17

Jan 1 00:00:13 OpenWrt user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>

Jan 1 00:00:13 OpenWrt user.info kernel: All bugs added by David S. Miller <[email protected]>

Jan 1 00:00:13 OpenWrt user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:2.

Jan 1 00:00:13 OpenWrt user.info kernel: Freeing unused kernel memory: 128k freed

Jan 1 00:00:13 OpenWrt user.warn kernel: Please be patient, while OpenWrt loads ...

Jan 1 00:00:13 OpenWrt user.warn kernel: diag: Detected 'D-Link DIR-320'

Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.

Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.

Jan 1 00:00:13 OpenWrt user.info kernel: roboswitch: Probing device eth0: found a 5325! It's a 5350.

Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: powering down PHY

Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using base directory: /

Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using storage directory: /jffs

Jan 1 00:00:15 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.

Jan 1 00:00:15 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.

Jan 1 00:00:17 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode

Jan 1 00:00:17 OpenWrt user.info kernel: device eth0 entered promiscuous mode

Jan 1 00:00:17 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state

Jan 1 00:00:20 OpenWrt user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096

Jan 1 00:00:20 OpenWrt user.info kernel: N_HDLC line discipline registered.

Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Using static regulatory domain info

Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Regulatory domain: US

Jan 1 00:00:20 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

Jan 1 00:00:20 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: US

Jan 1 00:00:24 OpenWrt user.notice kernel: SCSI subsystem initialized

Jan 1 00:00:25 OpenWrt user.info kernel: cfg80211: Regulatory domain changed to country: US

Jan 1 00:00:25 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

Jan 1 00:00:25 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

Jan 1 00:00:25 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)

Jan 1 00:00:25 OpenWrt user.info kernel: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Jan 1 00:00:25 OpenWrt user.info kernel: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Jan 1 00:00:25 OpenWrt user.info kernel: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Jan 1 00:00:25 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

Jan 1 00:00:26 OpenWrt user.info kernel: usbcore: registered new interface driver usbfs

Jan 1 00:00:26 OpenWrt user.info kernel: usbcore: registered new interface driver hub

Jan 1 00:00:26 OpenWrt user.info kernel: usbcore: registered new device driver usb

Jan 1 00:00:27 OpenWrt user.info kernel: b43-phy0: Broadcom 5354 WLAN found (core revision 13)

Jan 1 00:00:27 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel'

Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::tx

Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::rx

Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::radio

Jan 1 00:00:27 OpenWrt user.info kernel: Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]

Jan 1 00:00:29 OpenWrt user.info kernel: PPP generic driver version 2.4.2

Jan 1 00:00:29 OpenWrt user.info kernel: tun: Universal TUN/TAP device driver, 1.6

Jan 1 00:00:29 OpenWrt user.info kernel: tun: © 1999-2004 Max Krasnyansky <[email protected]>

Jan 1 00:00:29 OpenWrt user.info kernel: PPP MPPE Compression module registered

Jan 1 00:00:29 OpenWrt user.info kernel: ip_tables: © 2000-2006 Netfilter Core Team

Jan 1 00:00:30 OpenWrt user.info kernel: NET: Registered protocol family 24

Jan 1 00:00:30 OpenWrt user.warn kernel: Driver 'sd' needs updating - please use bus_type methods

Jan 1 00:00:30 OpenWrt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Jan 1 00:00:30 OpenWrt user.info kernel: PPTP driver version 0.8.4

Jan 1 00:00:31 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (512 buckets, 2048 max)

Jan 1 00:00:33 OpenWrt user.warn kernel: nf_conntrack_rtsp v0.6.21 loading

Jan 1 00:00:33 OpenWrt user.warn kernel: nf_nat_rtsp v0.6.21 loading

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB OHCI Controller

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 1

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003000

Jan 1 00:00:33 OpenWrt user.info kernel: usb usb1: configuration #1 chosen from 1 choice

Jan 1 00:00:33 OpenWrt user.info kernel: hub 1-0:1.0: USB hub found

Jan 1 00:00:33 OpenWrt user.info kernel: hub 1-0:1.0: 2 ports detected

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB EHCI Controller

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 2

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003800

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: USB 0.0 started, EHCI 1.00

Jan 1 00:00:33 OpenWrt user.info kernel: usb usb2: configuration #1 chosen from 1 choice

Jan 1 00:00:33 OpenWrt user.info kernel: hub 2-0:1.0: USB hub found

Jan 1 00:00:33 OpenWrt user.info kernel: hub 2-0:1.0: 2 ports detected

Jan 1 00:00:33 OpenWrt user.info kernel: usbcore: registered new interface driver usblp

Jan 1 00:00:34 OpenWrt user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 1

Jan 1 00:00:34 OpenWrt user.info kernel: usb 1-1: new full speed USB device using ohci_hcd and address 2

Jan 1 00:00:34 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice

Jan 1 00:00:38 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/ucode13.fw

Jan 1 00:00:39 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0initvals13.fw

Jan 1 00:00:40 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0bsinitvals13.fw

Jan 1 00:00:40 OpenWrt user.info kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)

Jan 1 00:00:45 OpenWrt user.info kernel: device wlan0 entered promiscuous mode

Jan 1 00:00:45 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state

Jan 1 00:00:48 OpenWrt user.info kernel: device wlan0 left promiscuous mode

Jan 1 00:00:48 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering disabled state

Jan 1 00:00:48 OpenWrt user.info kernel: device wlan0 entered promiscuous mode

Jan 1 00:00:48 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state

Jan 1 00:00:49 OpenWrt user.info sysinit: Loading defaults

Jan 1 00:00:50 OpenWrt user.info sysinit: Loading synflood protection

Jan 1 00:00:50 OpenWrt user.info sysinit: Adding custom chains

Jan 1 00:00:50 OpenWrt user.info sysinit: Loading zones

Jan 1 00:00:53 OpenWrt user.info sysinit: Loading forwarding

Jan 1 00:00:53 OpenWrt user.info sysinit: Loading redirects

Jan 1 00:00:53 OpenWrt user.info sysinit: Loading rules

Jan 1 00:00:53 OpenWrt user.info sysinit: Loading includes

Jan 1 00:00:53 OpenWrt user.info sysinit: Loading zone defaults

Jan 1 00:00:54 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan

Jan 1 00:00:55 OpenWrt user.notice root: adding wan (eth0.1) to firewall zone wan

Jan 1 00:00:56 OpenWrt cron.err crond[1199]: crond (busybox 1.14.4) started, log level 5

Jan 1 00:00:57 OpenWrt authpriv.info dropbear[1206]: Running in background

Jan 1 00:00:57 OpenWrt user.info sysinit: pppoe: ioctl(SIOCGIFHWADDR): No such device

Jan 1 00:00:57 OpenWrt daemon.err pppoe-relay[1217]: ioctl(SIOCGIFHWADDR): No such device

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: started, version 2.51 cachesize 150

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCP, IP range 192.168.1.100 -- 192.168.1.251, lease time 12h

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: using local addresses only for domain lan

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: reading /tmp/resolv.conf.auto

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: using nameserver 86.110.181.72#53

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: using nameserver 213.138.70.6#53

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: using local addresses only for domain lan

Jan 1 00:01:01 OpenWrt daemon.info dnsmasq[1239]: read /etc/hosts - 1 addresses

Jan 1 00:01:01 OpenWrt daemon.err dnsmasq-dhcp[1239]: failed to read /etc/ethers: No such file or directory

Jan 1 00:01:02 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial

Jan 1 00:01:02 OpenWrt user.info kernel: USB Serial support registered for generic

Jan 1 00:01:02 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic

Jan 1 00:01:02 OpenWrt user.info kernel: usbserial: USB Serial Driver core

Jan 1 00:01:03 OpenWrt user.info kernel: USB Serial support registered for pl2303

Jan 1 00:01:03 OpenWrt user.info kernel: pl2303 1-1:1.0: pl2303 converter detected

Jan 1 00:01:03 OpenWrt user.info kernel: usb 1-1: pl2303 converter now attached to ttyUSB0

Jan 1 00:01:03 OpenWrt user.info kernel: usbcore: registered new interface driver pl2303

Jan 1 00:01:03 OpenWrt user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver

Jan 1 00:01:03 OpenWrt user.info kernel: USB Serial support registered for FTDI USB Serial Device

Jan 1 00:01:03 OpenWrt user.info kernel: usbcore: registered new interface driver ftdi_sio

Jan 1 00:01:03 OpenWrt user.info kernel: ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver

Jan 1 00:01:03 OpenWrt user.info kernel: Initializing USB Mass Storage driver...

Jan 1 00:01:03 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage

Jan 1 00:01:03 OpenWrt user.info kernel: USB Mass Storage support registered.

Jan 1 00:01:06 OpenWrt user.info sysinit: Starting igmpproxy in normal mode

Jan 1 00:01:13 OpenWrt daemon.info hostapd: wlan0: STA 90:4c:e5:93:2c:2c IEEE 802.11: authenticated

Jan 1 00:01:13 OpenWrt daemon.info hostapd: wlan0: STA 90:4c:e5:93:2c:2c IEEE 802.11: associated (aid 1)

Jan 1 00:01:19 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPDISCOVER(br-lan) 90:4c:e5:93:2c:2c

Jan 1 00:01:19 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPOFFER(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c

Jan 1 00:01:19 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPREQUEST(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c

Jan 1 00:01:19 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPACK(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c emachine-52189d

Jan 1 00:01:27 OpenWrt user.info sysinit: <<<< Synchronization system time... >>>>

Apr 2 05:53:22 OpenWrt user.warn igmpproxy[1291]: MRT_DEL_MFC; Errno(2): No such file or directory

Apr 2 05:53:45 OpenWrt cron.err crond[1199]: time disparity of 21169792 minutes detected

вот лог

Jan 1 00:00:13 OpenWrt user.info kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

Jan 1 00:00:13 OpenWrt user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)

Jan 1 00:00:13 OpenWrt user.info kernel: TCP reno registered

Jan 1 00:00:13 OpenWrt user.info kernel: NET: Registered protocol family 1

Jan 1 00:00:13 OpenWrt user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher

Jan 1 00:00:13 OpenWrt user.warn kernel: Registering mini_fo version $Id$

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A

Jan 1 00:00:13 OpenWrt user.info kernel: b44.c:v2.0

Jan 1 00:00:13 OpenWrt user.info kernel: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:90:4c:c0:00:00

Jan 1 00:00:13 OpenWrt user.warn kernel: flash init: 0x1c000000 0x02000000

Jan 1 00:00:13 OpenWrt user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0

Jan 1 00:00:13 OpenWrt user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040

Jan 1 00:00:13 OpenWrt user.warn kernel: Physically mapped flash: Swapping erase regions for broken CFI table.

Jan 1 00:00:13 OpenWrt user.notice kernel: number of CFI chips: 1

Jan 1 00:00:13 OpenWrt user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Jan 1 00:00:13 OpenWrt user.notice kernel: Flash device: 0x400000 at 0x1fc00000

Jan 1 00:00:13 OpenWrt user.notice kernel: bootloader size: 262144

Jan 1 00:00:13 OpenWrt user.notice kernel: Creating 4 MTD partitions on "Physically mapped flash":

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x000000000000-0x000000040000 : "cfe"

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x000000040000-0x0000003f0000 : "linux"

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x000000112c00-0x0000003f0000 : "rootfs"

Jan 1 00:00:13 OpenWrt user.warn kernel: mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

Jan 1 00:00:13 OpenWrt user.notice kernel: mtd: partition "rootfs" set to be root filesystem

Jan 1 00:00:13 OpenWrt user.info kernel: mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x0000003a0000-0x0000003f0000 : "rootfs_data"

Jan 1 00:00:13 OpenWrt user.notice kernel: 0x0000003f0000-0x000000400000 : "nvram"

Jan 1 00:00:13 OpenWrt user.info kernel: BCM47xx Watchdog Timer enabled (30 seconds, nowayout)

Jan 1 00:00:13 OpenWrt user.info kernel: TCP westwood registered

Jan 1 00:00:13 OpenWrt user.info kernel: NET: Registered protocol family 17

Jan 1 00:00:13 OpenWrt user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>

Jan 1 00:00:13 OpenWrt user.info kernel: All bugs added by David S. Miller <[email protected]>

Jan 1 00:00:13 OpenWrt user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:2.

Jan 1 00:00:13 OpenWrt user.info kernel: Freeing unused kernel memory: 128k freed

Jan 1 00:00:13 OpenWrt user.warn kernel: Please be patient, while OpenWrt loads ...

Jan 1 00:00:13 OpenWrt user.warn kernel: diag: Detected 'D-Link DIR-320'

Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.

Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.

Jan 1 00:00:13 OpenWrt user.info kernel: roboswitch: Probing device eth0: found a 5325! It's a 5350.

Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: powering down PHY

Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using base directory: /

Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using storage directory: /jffs

Jan 1 00:00:15 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.

Jan 1 00:00:15 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.

Jan 1 00:00:17 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode

Jan 1 00:00:17 OpenWrt user.info kernel: device eth0 entered promiscuous mode

Jan 1 00:00:17 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state

Jan 1 00:00:20 OpenWrt user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096

Jan 1 00:00:20 OpenWrt user.info kernel: N_HDLC line discipline registered.

Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Using static regulatory domain info

Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Regulatory domain: US

Jan 1 00:00:20 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

Jan 1 00:00:20 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: US

Jan 1 00:00:24 OpenWrt user.info kernel: cfg80211: Regulatory domain changed to country: US

Jan 1 00:00:24 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

Jan 1 00:00:24 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

Jan 1 00:00:24 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)

Jan 1 00:00:24 OpenWrt user.info kernel: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Jan 1 00:00:24 OpenWrt user.info kernel: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Jan 1 00:00:24 OpenWrt user.info kernel: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Jan 1 00:00:24 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

Jan 1 00:00:25 OpenWrt user.notice kernel: SCSI subsystem initialized

Jan 1 00:00:26 OpenWrt user.info kernel: usbcore: registered new interface driver usbfs

Jan 1 00:00:26 OpenWrt user.info kernel: usbcore: registered new interface driver hub

Jan 1 00:00:26 OpenWrt user.info kernel: usbcore: registered new device driver usb

Jan 1 00:00:27 OpenWrt user.info kernel: b43-phy0: Broadcom 5354 WLAN found (core revision 13)

Jan 1 00:00:27 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel'

Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::tx

Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::rx

Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device: b43-phy0::radio

Jan 1 00:00:27 OpenWrt user.info kernel: Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]

Jan 1 00:00:29 OpenWrt user.info kernel: PPP generic driver version 2.4.2

Jan 1 00:00:29 OpenWrt user.info kernel: tun: Universal TUN/TAP device driver, 1.6

Jan 1 00:00:29 OpenWrt user.info kernel: tun: © 1999-2004 Max Krasnyansky <[email protected]>

Jan 1 00:00:29 OpenWrt user.info kernel: PPP MPPE Compression module registered

Jan 1 00:00:29 OpenWrt user.info kernel: ip_tables: © 2000-2006 Netfilter Core Team

Jan 1 00:00:30 OpenWrt user.info kernel: NET: Registered protocol family 24

Jan 1 00:00:30 OpenWrt user.warn kernel: Driver 'sd' needs updating - please use bus_type methods

Jan 1 00:00:30 OpenWrt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Jan 1 00:00:30 OpenWrt user.info kernel: PPTP driver version 0.8.4

Jan 1 00:00:31 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (512 buckets, 2048 max)

Jan 1 00:00:32 OpenWrt user.warn kernel: nf_conntrack_rtsp v0.6.21 loading

Jan 1 00:00:32 OpenWrt user.warn kernel: nf_nat_rtsp v0.6.21 loading

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB OHCI Controller

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 1

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003000

Jan 1 00:00:33 OpenWrt user.info kernel: usb usb1: configuration #1 chosen from 1 choice

Jan 1 00:00:33 OpenWrt user.info kernel: hub 1-0:1.0: USB hub found

Jan 1 00:00:33 OpenWrt user.info kernel: hub 1-0:1.0: 2 ports detected

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB EHCI Controller

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 2

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003800

Jan 1 00:00:33 OpenWrt user.info kernel: ohci_hcd ssb0:1: USB 0.0 started, EHCI 1.00

Jan 1 00:00:33 OpenWrt user.info kernel: usb usb2: configuration #1 chosen from 1 choice

Jan 1 00:00:33 OpenWrt user.info kernel: hub 2-0:1.0: USB hub found

Jan 1 00:00:33 OpenWrt user.info kernel: hub 2-0:1.0: 2 ports detected

Jan 1 00:00:33 OpenWrt user.info kernel: usbcore: registered new interface driver usblp

Jan 1 00:00:33 OpenWrt user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 1

Jan 1 00:00:34 OpenWrt user.info kernel: usb 1-1: new full speed USB device using ohci_hcd and address 2

Jan 1 00:00:34 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice

Jan 1 00:00:38 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/ucode13.fw

Jan 1 00:00:39 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0initvals13.fw

Jan 1 00:00:39 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0bsinitvals13.fw

Jan 1 00:00:39 OpenWrt user.info kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)

Jan 1 00:00:44 OpenWrt user.info kernel: device wlan0 entered promiscuous mode

Jan 1 00:00:44 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state

Jan 1 00:00:47 OpenWrt user.info kernel: device wlan0 left promiscuous mode

Jan 1 00:00:47 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering disabled state

Jan 1 00:00:47 OpenWrt user.info kernel: device wlan0 entered promiscuous mode

Jan 1 00:00:47 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state

Jan 1 00:00:48 OpenWrt user.info sysinit: Loading defaults

Jan 1 00:00:49 OpenWrt user.info sysinit: Loading synflood protection

Jan 1 00:00:49 OpenWrt user.info sysinit: Adding custom chains

Jan 1 00:00:50 OpenWrt user.info sysinit: Loading zones

Jan 1 00:00:52 OpenWrt user.info sysinit: Loading forwarding

Jan 1 00:00:52 OpenWrt user.info sysinit: Loading redirects

Jan 1 00:00:52 OpenWrt user.info sysinit: Loading rules

Jan 1 00:00:52 OpenWrt user.info sysinit: Loading includes

Jan 1 00:00:52 OpenWrt user.info sysinit: Loading zone defaults

Jan 1 00:00:53 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan

Jan 1 00:00:54 OpenWrt user.notice root: adding wan (eth0.1) to firewall zone wan

Jan 1 00:00:55 OpenWrt cron.err crond[1199]: crond (busybox 1.14.4) started, log level 5

Jan 1 00:00:56 OpenWrt authpriv.info dropbear[1206]: Running in background

Jan 1 00:00:56 OpenWrt user.info sysinit: pppoe: ioctl(SIOCGIFHWADDR): No such device

Jan 1 00:00:56 OpenWrt daemon.err pppoe-relay[1217]: ioctl(SIOCGIFHWADDR): No such device

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: started, version 2.51 cachesize 150

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCP, IP range 192.168.1.100 -- 192.168.1.251, lease time 12h

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: using local addresses only for domain lan

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: reading /tmp/resolv.conf.auto

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: using nameserver 86.110.181.72#53

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: using nameserver 213.138.70.6#53

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: using local addresses only for domain lan

Jan 1 00:01:00 OpenWrt daemon.info dnsmasq[1239]: read /etc/hosts - 1 addresses

Jan 1 00:01:00 OpenWrt daemon.err dnsmasq-dhcp[1239]: failed to read /etc/ethers: No such file or directory

Jan 1 00:01:01 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial

Jan 1 00:01:01 OpenWrt user.info kernel: USB Serial support registered for generic

Jan 1 00:01:01 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic

Jan 1 00:01:01 OpenWrt user.info kernel: usbserial: USB Serial Driver core

Jan 1 00:01:02 OpenWrt user.info kernel: USB Serial support registered for pl2303

Jan 1 00:01:02 OpenWrt user.info kernel: pl2303 1-1:1.0: pl2303 converter detected

Jan 1 00:01:02 OpenWrt user.info kernel: usb 1-1: pl2303 converter now attached to ttyUSB0

Jan 1 00:01:02 OpenWrt user.info kernel: usbcore: registered new interface driver pl2303

Jan 1 00:01:02 OpenWrt user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver

Jan 1 00:01:02 OpenWrt user.info kernel: USB Serial support registered for FTDI USB Serial Device

Jan 1 00:01:02 OpenWrt user.info kernel: usbcore: registered new interface driver ftdi_sio

Jan 1 00:01:02 OpenWrt user.info kernel: ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver

Jan 1 00:01:02 OpenWrt user.info kernel: Initializing USB Mass Storage driver...

Jan 1 00:01:02 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage

Jan 1 00:01:02 OpenWrt user.info kernel: USB Mass Storage support registered.

Jan 1 00:01:05 OpenWrt user.info sysinit: Starting igmpproxy in normal mode

Jan 1 00:01:17 OpenWrt daemon.info hostapd: wlan0: STA 90:4c:e5:93:2c:2c IEEE 802.11: authenticated

Jan 1 00:01:17 OpenWrt daemon.info hostapd: wlan0: STA 90:4c:e5:93:2c:2c IEEE 802.11: associated (aid 1)

Jan 1 00:01:23 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPDISCOVER(br-lan) 90:4c:e5:93:2c:2c

Jan 1 00:01:23 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPOFFER(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c

Jan 1 00:01:23 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPREQUEST(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c

Jan 1 00:01:23 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPACK(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c emachine-52189d

Jan 1 00:01:26 OpenWrt user.info sysinit: <<<< Synchronization system time... >>>>

Jan 1 00:01:26 OpenWrt user.warn igmpproxy[1290]: The origin for route 239.255.255.250 changed from 192.168.1.2 to 192.168.1.176

Apr 1 17:19:35 OpenWrt user.warn igmpproxy[1290]: MRT_DEL_MFC; Errno(2): No such file or directory

Apr 1 17:20:09 OpenWrt cron.err crond[1199]: time disparity of 21169039 minutes detected

Apr 1 17:35:25 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPINFORM(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c

Apr 1 17:35:25 OpenWrt daemon.info dnsmasq-dhcp[1239]: DHCPACK(br-lan) 192.168.1.176 90:4c:e5:93:2c:2c emachine-52189d

Добрый вечер

dir320 (прошивка от23.03.10) интернет проводной (воткунл все авом,атом настроилось), ресивер опенбокс ф300, серез usb-com пытаюсь шаринг подключить, не получается

/usr/local/etc/mpcs.conf выбирал Device = auto://tuner@/dev/usb/tts/0?delay=2&timeout=500

Вообщем проовал соеденить ztemf626 (разлочен и ничего в нем нет) чисто модем без всякого софта.

Dir 320 DIR-320_OpenWrt_3g_mpcs_linux_2.6.30.10_(06.03.10)_DANtes.trx

Выдает:

Committing network ...

Waiting for the commit to finish...

Reloading network ...

* usb_modeswitch: tool for controlling "flip flop" mode USB devices

* Version 0.9.7 © Josua Dietze 2009

* Works with libusb 0.1.12 and probably other versions

Looking for target devices ...

No devices in target mode or class found

Looking for default devices ...

Found default devices (1)

Prepare switching, accessing device 010 on bus 002 ...

No MessageEndpoint given. Trying to autodetect ...

OK, using endpoint 0x01

Looking for active driver ...

OK, driver found ("usb-storage")

OK, driver "usb-storage" detached

Setting up communication with interface 0 ...

Trying to send the message to endpoint 0x01 ...

OK, message successfully sent

-> Run lsusb to note any changes. Bye

insmod: can't insert 'cdc-acm': File exists

Can't open device /dev/ttyUSB3.

Can't open device /dev/ttyUSB3.

wan(3g): Failed to set the PIN code or open Modem Port.

никаких пинкодов нет на симке!

Подскажите какой прошивкой шить 320, связка с модемом зтемф626. ?

МПЦС не нужен т.к ресивер на линуксе. Нужна стабильная работа с 3g и wifi.

Спасибо

Люди если не трудно, дайте (выложите) список каналов нтв+HD+укр пакета в *.fdu

самому не получается отредактировать из всех градусов... =(

спасибо

stast

программой 3CYSlog

так и должно быть- ты включил внешний эмулятор- сейчас после перезагрузки из сети он будет включён постоянно по умолчанию.

выключить- меню синяя кнопка.

стань на транспондер в DVBS-2 и введи параметры

12073 L

SR 27500

FEC 3/4

8psk

и сканируй http://www.lyngsat.com/packages/ntvplus36.html

спасбио за ответ, а не подскажите почему сетевые параметры меняются при выключении с wifi на ethernet, мне при включении нужен только wifi!

И еще один глупейший вопрос: может где-то есть список каналов, чтобы залил на флешку и показывает, нужны только нтв+HD. Нащел список всех и программу cheedit, но там не получается удалить ненужные мне каналы, спасибо

запустилось только после нажатия меню и красной кнопки, а как бы автоматом поставить? и не пойму как hd каналы на +++ найти

установил 86 прошивку, соеденился по ftp залил папку var? согласился с замещением файлов, в нюкамд.лист прописал настройки xxx.xxx.xxx.xxx логин пароль 0102....

Инет у меня он ловит wifi свистку asus (сеть видит показывает уровень сигнала).

А всеравно не идет картинка "канал закодирован", зажимал exit (пишет рестарт и потом опять "канал закодирован).

И не пойму как можно снять лог с ресиверhf раотающего по шарингу!? Ведь инет на него не удет идти...

Помогите разораться, как лог то снять?

Прошился прошивкой которая лежит на этом сайте ( последняя за 9 марта), настроил wifi связь с роутером, теперь думаю как шаринг настроить, исключительно плагином? а каким лучше, чтоб каналы быстрее переключались.

Дорый день купил SW Platinum? хочу смотреть шару нтв + HD, соединятся удет с роутером дир320 по wifi.

Хочу залить ПО Прошивка от 9.03.2010 v1.07.97

На форуме скайвея есть официальное и неофициальное мне какое нужно?

Подскажите в классике, wifi встроен? или надо usb wifi покупать? тогда какие модели usb wifi подходят? спасибо.

Как привязать иденты каналам box500? Спасибо

Подскажите пожалуйста будет ли работать дир320+3гмодем (3г не ловится есттьтолько edge) будет ли работать нтв + HD пакет? спасибо

p.s. модем zte626 разлоченный

Телек у меня Panasonic Viera, ресивер box-500, еще есть x-box360, хотелось бы один пульт для этого всего прикупить... а как не знаю, програмируемый наверно какой-нибудь ...?

Может подскажете где копать?

Спасибо

Единственное что кажеться картинка хуже качеством какбудто по сравнению сопенбоксом800, особенно заметно на футболе...

Но вообщем не критично

Для пакета НТВ + (Рос + Укр + HD) (36e) порт 10000, но для BOX-500 лучше брать пакет НТВ + (Рос + Укр ) где порт 10001 тогда каналы будут переключатся быстрее.

порты менял не проходит login faild хотя уже 100 раз проверял

Проблему решил, снял галочку EMM и все заработало

Купил BOX-500? прошил через com прошивкой truman_5119_house_net_2.4.51_all.dld.

Пакет у меня НТВ + (Рос + Укр + HD) (36e), ресивер подключается к роутеру длин624 (установлен ноутбук и xbox безкаких либо настроек в них легко выходят в интернет)

Начал настраивать каналы удалил все транспордеры, потом добавил такой 12322 V 27500 Auto нашел много каналов, показывает только Инфоканал.

В настройках шары ввел сервер15 свой его порт 10001, логин пароль поставил все галочки... потом карсную кнопку пишет : Connecting toServer... Conection closed.

Пингуется пинг 60 -70 ms.

В роутере видится ресивер/

А картинки нет, где копать?

Нажал кнопку i- сменить канал посмотрел что пишет connecting Established а патом User 99у448В Login faild но это мой логин и он работает...